Let's Make Robots!

Log in to get help, show off, share and inspire:

wrench_orange.png Your work in progress or a finished robot: Robot project
script_edit.png Write in your own blog: Blog entry
comments.png Discussions and questions: Forum topic
brick.png Show what you are making robots of: Component
lightbulb.png Help others with what you have learned: Tip or walk through
link.png Add a good web shop, a guide or a cool link: Web link
Telepresence robot
Hi!! I made  telepresence robot. Device was mounted on the robot:LIVA(small windows PC),Arduino Development language:Processing Read more
Hello,  After buying an Arduino starter kit and playing a little bit with it I found out that it's possible to create robots with it. Doing some research on … Read more
ENG This is my first robot. I am completing the College of Information Systems and my TCC will be one based on the Open Source Arduino robot technology, but even … Read more
[Update: Chapter PROGRAMMING - Chat bot mode] Introduction x2 is a small humanoid robot platform for my current research. The specifications are as following: Read more
LM4755 amp it is a fun project i always like to build audio projects, i repair amplifiers.   chips: power amp chip(LM4755) preamp chip(LM4562) EQ 3 band(LM4562) … Read more
Inspired by RodriBot, by Luismi, I decided to make my own biped. I used the four servos that didn't fry in Kubik (the ones I had there before replacing with bigger … Read more
This tutorial is still under contruction so please check weekly for updates. I have taken it out of "Draft Mode" because it has a lot of useful information for … Read more
Guys this is my(our viz. me and my cousin) second robot based on Oddbot's Quadbot. Must firstly thank DAGU & robotshop.com for providing me all the materials … Read more
Remote-controlled from a computer.
  I decided to work on something smaller, using all the experience I gained with Kubik. This one is as small as I could make it, uses an Arduino Pro Micro for the … Read more
Look maaa', no tools! :D Well, that's not entirely true, but it isn't far off. I have constructed this robot with a minimum of tools (and materials) , for the … Read more
Ok, so I have wanted to build a robot for a while, but school prevented me from starting anything.  At the beginning of this summer I bought a Raspberry Pi to just … Read more
Creep, trip over its own legs
This is my attempt at a four-legged crawler. Right now it just has two servos per leg, and pretty random ones at that. I plan to replace them and add a knee to each … Read more
Spinning line follower or maze solver
I've now attached a 3D model in Sketchup. Scamper started as an experimental omni wheel platform. The challenge with omni or mecanum wheels is that you need precise … Read more

Note: You can follow some projects some of the time, but you cannot follow all the projects all the time.




Recently collected


Simple servo bracket

Birdmun an Hi jinx got me looking into open scad, he is code a bracket for a servo you can adjust just by playing with a few numbers, the software is free and there's some tutoreals on line and youtube, you can export STL's as well. I did not think I would like it but after playing with it, my mind is more open, for simple shapes it is very fast.

http://www.openscad.org/

Servo Bracket p, li { white-space: pre-wrap; }

difference(){

union(){

Capturing Data from 7-Segment Display

Something I've wanted to do for a while is to be able to digitize the data from cheap sensors with a 7-segment display.

I decided to give it a try with some USB charge meters.

I purchased four of these meters.

I opened up one of the blue ones and probed the pins to see how the 7-segments were wired.

Servo problems!

I'm having a lot of problems with the servos I'm using to build a quadruped robot. I should start by mentioning that I bought the servos from Dagu like 4 years ago, BUT most of them had never even been unpacked until recently.

The problems are the following:

This tutorial is still under contruction so please check weekly for updates. I have taken it out of "Draft Mode" because it has a lot of useful information for … Read more
Ok, so I have wanted to build a robot for a while, but school prevented me from starting anything.  At the beginning of this summer I bought a Raspberry Pi to just … Read more

Flash Memory of Arduino Uno

 

Sketch uses 13,308 bytes (41%) of program storage space. Maximum is 32,256 bytes.

Global variables use 2,082 bytes (101%) of dynamic memory, leaving -34 bytes for local variables. Maximum is 2,048 bytes.

processing.app.debug.RunnerException: Not enough memory; see http://www.arduino.cc/en/Guide/Troubleshooting#size for tips on reducing your footprint.

Inspired by RodriBot, by Luismi, I decided to make my own biped. I used the four servos that didn't fry in Kubik (the ones I had there before replacing with bigger … Read more

Looking for a custom built inspection robot

Hello to all the community,

I'm looking for a micro TIR (tactical inspection robot) either tracked or wheeled but tall about 1,7 cm , wifi controlled by pc or android tablet and with cctv camera.