Let's Make Robots!

kariloy's blog

Pandora, the Makibox (by Kariloy)

Well, as many of you know I've been waiting for my own very 3D printer kit for quite a while (almost 16 months). But finally, this past Wednesday (Feb, 5th 2014) I finally got it. If you want to read more about it's arrival you can check it here.

And if you fancy really poor quality videos and you see the initial unboxing here.

A win... but with a partial (82%) sour after-taste!

So today I finally got my hands on what I came to call my "DAGU loot", a selection of DAGU items that I acquired using the credit I won from participating and winning 1st prize on the Doodle Bot Art Competition with my Little Stella and her artistic talents.

First off, kudos for OddBot for issuing yet another Challenge and overall being a pillar of this community and DAGU for sponsoring it.

Starting...

So, this weather hmm?

Ok, this blog is meant to post content related to the progress of my little garden monitor.

Objectives:

- Low power node (using an atmega chip)

- Measures: temperature, humidity, luminosity, soil moisture

- Reports it back to a central node (via nRF24L01+ modules) at specified time intervals

==========================================================================

October, 25th 2013

Robocop...ies

Sometimes, there are robots that are good as they are. It's not worth even to try to do my own spin of them. But because I like them so much I would like to have them/build them. So, I dedicate this blog post for reporting my assemblies of robot copies of other people famous robots in which I've just followed the instructions.

 

 

ALF - Analog Line Follower: http://letsmakerobots.com/node/33449

 

Sketchy businesses -- my 3D parts modelling log...

Well, currently there's not a day that goes by without me reading someone talking about 3D printing, 3D printers and whatnot. Also, I've been reading of how easy SketchUp is to work with, so given my failure to make anything of Blender around almost 10 years ago... I decided to give SketchUp a try.

Note: Newer designs are at the top (for chronological reading start at the bottom of the post)

 

02 - Second practical motivation:

Boards & Boards (to get you bored) -- a log of homebrewed circuits coming to life...

I decided to make a blog to serve as a log for the boards I design and/or produce... well mostly because I can. So here it goes.

NOTE: Older boards at the bottom, newer at the top. So do bottom-up read if you're after a chronological perspective.

 

05 - Practice makes perfect (eventually) OR the h-bridgemania

R/C with arduino & NRF24L01+ 2.4GHz Antenna Wireless Transceiver Module

 

October, 11th 2012

Well, my prototype remote controller is nearly finished now.

Bellow you can see the ON/OFF switch placement (that's for you Hoff).

The backside of the board after a hand of nail polish (yeah, I know, yet another archaic method). Also notice the little blue jumper wire that I had to add to correct Eagle's auto-routing mistake (and my blindness to detect it at the that time).

Of mice and men...

UPDATE: This project is now complete. Further details can be seen at GhostRoachMouseBullRam project page. You can still read below to see my adventures and problems encountered this project.

Semi-loose thoughts from a total begginer

I'll be using this blog entry to kind of introduce myself, and gather/organize my thoughts and plan my way into making my first robot but also receive any advice that might be given to me.

(relevant) background:

informatics

path of interests (line of thinking) that led me here: