3D printed LMR Logo Bot
August 8, 2013
Since I need to test and improve the 3D printer on my desk I wanted to print a LMR logo bot. After a short request in the forum I've got the 3D file from birdmun, who else could answer that qucik and even have the right thing you need. bird, thanks man....you are the true LMneRd ;-) That is the file: https://www.dropbox.com/s/v4vgif5tude0v63/LMRLogobot.stl
Now the pictures:
I am not explaining every picture since it's quite obvious what parts you will see.
Printing time 2:48 h with 70% infill. I used the Dreammaker with orange PLA which is not that good quality than some other colors. It might be from another supplier. First it's not sticking on the bed when printing with 100% speed so I need to slow the first layer down to 70-50% and then go to 100% after the first layer. I forgot to speed it up so the printing time was longer than Cura told me.
Still, the filament is not quite good, the overhang on the brain ball was quite ugly and had to be cutted clean.
UPDATE August 9: Time lapse video of the print is online. Sorry, onnly on Youku, did not have time to process it for Youtube.