Let's Make Robots!

Most Collected

Serves beer cans (or any other can).
Using a
HeinyBot 2.0, robot waiter in process of construction. 90%. Four modes of operation provided. Manual, Static Waiter, Dynamic Waiter and Presentation. In manual mode … Read more
Balances on 2 wheels, r/c controlled
Using a
      Well I am not sure I understand the phrase 'time to build' but that would be the time it took me to cut the parts and mount the motors, getting it to … Read more
Introduction SPURT stands for School Project Using Robot Technology, a concept introduced by the Rostock University, in Germany. You can find more about their … Read more
XBee Files - Part 1 - Basic Communications and Setup. Non-Stream Video :- XBee Files Part 1 This guide will take you through the basic setting up of the XBees in an … Read more
Navigate around via ultrasound, climb low objects
Using a
project: SC-QR-1           (NOT MY VIDEO----->) Small Compact - Quad Robot - 1 so i started getting inspriated by some robots i saw on youtube! … Read more
Show how to improve the output of analog sensors
Indroduction: The Sharp GP2Dxxx family is often used in robotics as distance sensors because the sensors are cheap and everywhere available. The normal use of these … Read more
It uses aggressive and angry behavior to push opponents or obstacles out of its ring
Using a
Here is the Micro-Sumo bot that I designed and built. I finished my Mini-Sumo and started looking at the next smaller size. A robot 50mm square looked like … Read more
MoMo is my current mobile software experiment platform.  Created out of a previous project (Mobile Laser Platform).  The purpose of MoMo is to continue to test … Read more
I wanted to make a small Arduino robot using an original Duemilanove and the Robot Builder's Shield. But I also wanted to have a chassis plate so I can mount the … Read more
head follows an object around the room
I was looking for a way to have a robots head follow something or someone around. The best results I found were the ones using a camera, but these are a bit … Read more
Shows you what kinds of things to consider when picking a battery for your robot
A simple explanation of IMU devices that does not require any advanced math.
 The full up-to-date text of article can be accessed here: http://starlino.com/imu_guide.html This guide is intended to everyone interested in inertial MEMS … Read more
I have purchased, what I hope, will be a good base for my next robot. It is a Jazzy "Z" chair from Pride Mobility that I bought at auction for $27.50. This chair … Read more
Hello, I have already had electric and gas rc cars, buggy, monster truck... And I wanted to build my self a tracked monster that could go quite fast, climb about … Read more
This is a small hack I made for a Make video. The code is attached above :) Read more