Let's Make Robots!
Most collected components shown below, refined by your search and/or selection. View All Components
i bought in to this deal - and it really is the most funny set of motor & wheel I have encountered so far: http://www.solarbotics.com/products/gm10w_deal/ Cool … Read more
The L298 is a dual H-bridge driver for DC brushed motors and stepper motors. It supports a wide operating voltage range and can deliver 2 A per channel in a … Read more
Price: $3.49 USD

 Collected by 2 members
This tiny, button-type, vibrating motor shakes with a vibration amplitude of 0.75g and draws approximately 60 mA when 3 V is applied to its leads. The … Read more
Price: $149 USD

 Collected by 2 members
The XC-3 LED Tile Control Kit provides a complete software programmable solution for controlling LED arrays and strings using XCore processors. The XC-3 is an … Read more
Price: $19.95 USD

 Collected by 2 members
This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 670 mA at 4.5 V, allowing for a holding torque … Read more
Price: $29.95 USD

 Collected by 2 members
The 12-channel Mini Maestro 12 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. … Read more
Price: $24.95 USD

 Collected by 2 members
The USB Host Shield contains all of the digital logic and analog circuitry necessary to implement a full-speed USB peripheral/host controller with your Arduino. … Read more
Price: $1.75 USD

 Collected by 2 members
This multi-color LED contains red, green, and blue elements that can be mixed to produce any color. Unlike many other RGB LEDs, this unit has a diffused white lens … Read more
These are generic connectors similar to the popular Deans Ultra Plug connectors. They are sold as matching male-female pairs and have a current rating of … Read more
This is an educational robot kit produced by Dagu electronics based on the atmega 8 processor. The kit comes with all parts including a manual, CD, serial cable and … Read more
The L298 motor driver IC is a very popular, but hard to use chip. Our Compact Motor Driver Kit tames this beast, and adds useful functionality! Read more
Price: $7.95 USD

 Collected by 2 members
This chassis base plate is a round piece of 1/8" (3 mm) acrylic with a 5" (127 mm) diameter and cutouts for building a differential-drive robot … Read more
Looking for a way to make your GP2D12 I2C compatible? The I2C-It is the optical sensor for you! Read more
XMP-64 Development Board The XMP-64 is available as an experimental board intended for research … Read more
I bought some small tilt-sensors. basicly they where a small metal capsule with a ball inside. When tilted, the contact was switched on/off. I thought this was … Read more
This set comes with two platforms and the clamps and pin sets (to mount your parts) for the two. This is pretty cheap and really easy to assemble. I bought one set … Read more
Price: $14.95 USD

 Collected by one member
The Pololu USB-to-serial adapter is a tiny unit that makes it easy to connect a microcontroller project to a PC. You can connect the adapter directly to a … Read more
Price: $24.95 USD

 Collected by one member
Order the Pololu ball caster variety pack and save! The variety pack consists of all seven Pololu ball casters. The replacement 3pi ball caster is not included … Read more