Let's Make Robots!
As usual my design has to do with water and something that my brother asked me to have a look at. What he needed was a way to launch a probe with a controlled … Read more
This is my second Picaxe project . It is a simple servo tester or servo cycler built using an 08M . It has 3 modes of operation . In mode 1 each servo is controlled … Read more
Well this seems to be an opportunity to good to be missed! A friend of mine was throwing out (THROWING OUT!!) the aforementioned CNC router. Well he wasnt, his … Read more
Clones TV remote signal, also works as a jammer for the IR signal.
This is a small IR remote capable of copying any 5 buttons of any Remote using IR. I was studying IR signals and this came into my mind. And guess what,it also has … Read more
Walks down slopes using gravity, makes his owner smile.
Wobbly is a 3D-printed, gravity-powered, walking automaton. He basically walks down slopes. Read more
Carry's on conversation and learns from what you type or say.
This project I have working on for about 3 years not continiously but just here and there when I felt like it. It understands speech and learns from you as you … Read more
Wavecrafter chirps and beeps at you to let you know about things and stuff.
So, a little while back I made a posting about adding a low-cost ADC module to micros for various reasons. At the same time as I was testing this concept out, I … Read more
***Update 2011/8/19*** First experiment using white wood glue (polyvinyl acetate) as a binder for the propellant hexaphenox. The advantage is that polyvinyl … Read more
See the electromagnetic fields around you
Senses the level of electromagnetic fields around the device and displays the intensity on the LED bar graph.  I designed this PCB after reading the make magizine … Read more
Set A Temperature For an Oven Using a Relay
This is my Arduino temperature-ramp PID controller, which is running on a hot plate (up to 325 C) and which shall also be tested on a furnace (up to 650 C).  This … Read more
Fades and flashes and keeps away the closet monster
Insired by Geir Andersen's RGB Nightlight, I thought I'd build one for my daughter. She's just started having nightmares (she's 3 years old) and wants the lights … Read more
Moves a DSLR camera on a track and controls the camera. It is used for capturing time lapses with camera motion.
 Lots of love to the LMR community from Finland!   Introduction: (Skip this if you dont have time to read general bullsh*t) Read more
This example is just one of many different ways you might give your robot a sense of touch.
Update 7AUG2013: Minor addition about the resistance (bottom of page) This example is just one of many different ways you might give your robot a sense of touch. … Read more
When I got my toy quad copter I could not get it to fly in a stable way. The toy quad copter was out of balance. I tore it apart. I found it was easier to move … Read more
I always wanted to make this thing :D :D It's not big thing, just that I didn't find anywhere an rc car that can pass big obstacles, but in the same time to have … Read more