Let's Make Robots!
See our new Mecanum Wheel Set! • FingerTech's revolutionary new Mecanum Wheels allow any robotics enthusiast to add omni-directional capabilities to their … Read more
Well it's finally here, The Universal sensor bracket designed here on LMR has had an upgrade! We are now selling the bracket as part of a Pan / Tilt Kit. The kit … Read more
DAGU now has minature servos available. The specifications are: Weight: 8g Torque: 1.5Kg / cm @ 4.8V Speed: 0.1 sec / 60 degrees Max voltage: 6V Travel: 180 … Read more
I have just received one of these actuators, in preparation for a lightweight Robot project. Also known as Nano muscle or miga motor. I would like to share the info … Read more
It's Here! Now with Video of it in Action on dirt using 34:1 gearboxes and new videos going down and up stairs and over snow with 75:1 gearboxes. Now available in … Read more
Add sound to your robot! Piezo speakers elements can be driven directly by a PIC output, and are nice and small. These are two varieties I picked up at the … Read more
 These kits have been discontinued and are no longer available   This is the FET version of the giant servo kit from Oatley Electronics. Will easily handle … Read more
Price: $300 USD

 Collected by one member
The servo motor that is used cost only 10usd.I used six motor to complete the 3 axis robotic arm.The motor specs: Voltage: 6 volt Torque: 3.4kg.cm price of the … Read more
Dagu has a nice range of wheels, particularly Omni wheels but until now it has been difficult to mount them. I have now designed some universal hubs that allow you … Read more
This mini stepper motor from the Electronic Goldmine was ridiculously cheap. However, it is wired strangely for a stepper motor, so I've collected some more info on … Read more
During the first Mr. Basic contest some people had trouble driving their motors because of the current required and because of the low voltage provided by Mr. … Read more
This 143:1 gear motor is much like the GM3 gear motor but runs at nearly twice the speed. Great for robots needing speed over torque! Another … Read more
This is a very nice little package. You have to assemble yourself, and there are 3 ways. You want to assemble in "C"-mode, ratio 203:1 The A & B setups, 58:1 … Read more
Futurlec has a good range of components, their prices are reasonable, they have no minimum order charge and they deliver around the world.  Postage is a bit slow … Read more

n/a
As if the name isn't enough to descibe these motors, they are absolutely the best I've ever had for the price!   Read more
Price: $40 USD
  Now, here is at last a new range of exciting actuators! This is just one example, check http://www.migamotors.com/Products.html for more. Read more
Great servo control on the cheap! This is a bare-bones servo driver -no connects, no board. It does come however, with a resonator included. It  uses a standard … Read more
Price: $15 USD
These little 16mm spur gearmotors from BaneBots pack a pretty serious punch for the dollar. They boast a 600+RPM rating at no load with 1500ma. The 3mm shaft when … Read more
Price: $40 USD
This kit is suitable for 10V to 30V motors. At 24V it can be used to power motors up to 500W, or up to 1KW when an additional four MOSFETs are added. The kit can be … Read more