Let's Make Robots!

LMR is going to Maker Faire NYC 2011

See us at Maker Faire!

What's MakerFaire?

From the MakerFaire.com website: "Maker Faire is the premier event for grassroots American innovation. As the World's Largest DIY Festival, this two-day family friendly Faire has something for everyone - a showcase of invention, creativity and resourcefulness and a celebration of the Maker mindset."

Where?

New York Hall of Science

More info

When?

September 17th and 18th, 2011

Why?

They are specifically looking for robotics (among many other things, of course). How can the biggest (and coolest) community of robot makers NOT be there?

Who's coming?

I need some more volunteers who are willing to spend at least four hours at the LMR table during the Faire. I believe four hours qualifies you for a day pass, and eight hours gets you a weekend pass to the Faire.

Here are the responses I have so far:

  • Me (Andrew Terranova, aka ignoblegnome)
  • flummer is coming from Denmark! He's volunteered to help with set-up, running the LMR table and tear-down. Good man!
  • GeneralGeek says he will come, but needs to leave town Sunday morning.
  • JoeBTheKing can come hang out at the LMR table for a while
  • Krumlink came to his senses and decided 15 hours from Michigan is too crazy... then he lost them again and said he might come down with his maker group.
  • TinHead will be in Boston sometime during September, and may be able to drive down to NYC for the Faire.

What are we doing/bringing?

Update 2011-09-12: Posted a video sneak peek of our stuff at MakerFaire. 

Here's what I wrote in the application for our project description:

LetsMakeRobots.com is the largest online community for hobby robot builders. At Make Faire, we'll demonstrate the famous Yellow Drum Machine (YDM) created by Frits Lyneborg, as well as other robots by our members. 

The YDM is a funky little free-range drumbot that roams around and makes beats on whatever he finds. He even samples and plays back sounds to mix with his music.

We may also have some fun projects for you to try yourself! If you've ever wanted to build a robot, you should stop by.

Our web page on MakerFaire.com: http://letsmakerobots.com/files/userpics/u2691/RBA1.jpg

Here's what we have so far:

 

  • Update 2011-09-11: Frits sent me his original YDM to demo at the Faire! He's all ready to go!

  • Patrick McCabe has offered to send along his maze solving robot.
  • Update 2011-08-31: Patrick is kindly including 3 sets of the AAA NiMh batteries his bot runs on. I have a charger that will work for those batteries, so we'll be all set for constant demonstrations.
  • Update 2011-09-11: I got the bot! I need to buy some white board to build his maze.

  • guibot is sending me a Farrusco kit!
  • Update 2011-09-11: I have the kit in hand. All ready to build at MakerFaire!

 

  • GeneralGeek may be able to bring his symet.

  • OddBot has offered to send me the original Chopsticks!
  • Update 2011-08-31: You can track his progress as he travels from China to the US!
  • Update 2011-09-11: I have received Chopsticks and tested him out. Some minor tweaks suggested by OddBot were implemented. I need to solder a connector to his power leads so I can connect the batteries I have.

  • Update 2011-08-25: I'm hoping I am going to leverage my preparations for an hands-on exhibit at the Children's Museum of Somerset NJ, and have some kits so people can come and make a simple robot at the Faire. The kits will be a simple SpurtBot line follower.
  • Update 2011-09-11: Design is finalized and I have most of the parts. Hopefully finishing this up today!

  • Update 2011-08-26: This just in... propellerheadgeek has offered to send me one of his Eric the Turtle robots! Laser-cuts sweetness.

  • Update 2011-09-12: Ro-Bot-X is sending one of his Robot Builder's Arduino (RBA) kits, which we'll build into something at the Faire.

  • JAX is frantically trying to finish a bot to send as well! Good luck, JAX!

 

Let me know if you can come. Also post your ideas, or if you would like to send something for us to display at the event. 

What's the setup like?

Table

We should have a "standard" table with two chairs. I originally said we could be outside, but I just send the Faire organizers an email asking if we could be inside so the sunlight won't interfere with all the IR and other light dependent sensors on our robots.

Update 2011-08-25: We will have an indoor setup with two tables and four chairs provided.

Update 2011-09-11: We'll be in Zone A' on Robot Square inside the NY Hall of Science. Check out the MakerFaire NYC Program Guide.

I'd like to set up one end of the table as a "robot rodeo". We may build an edge around it so robots don't fall off too easily, and there will probably be a black on white maze for Patrick's maze solver and any line followers.

Power

I've requested 15A AC power service available so we can use soldering irons, hot glue guns, recharge batteries, etc. I'll bring a power strip. I'll have a NiCad/NiMH battery charger on hand too.

Signage

We have a banner design by flummer, which I will look into getting printed locally. I'm hoping to bring along some aluminium poles to display the banner above the table. I'm also planning on a standing table display featuring the Logobot.

I priced printing for the banner at Vista Print and Cafe Press. Both came in at about $55. I'll check a local print shop and see if I can do any better.

Update: 2011-08-31: Shirts

Hey, flummer also designed some shirt logos! They will be iron-on transfers, so LMR members coming to MakerFaire should bring a dark colored cotton shirt they would like to have the designs on.

Small Logo for front-breast, pocket or sleeve:

 

Large logo for shirt back or front:

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

any pattern(pdf) of that shirt logos available for printing? i would definitley print my own!

Sorry for the delay, but here they are, ome file for the front logo and one for the back.

I made the t-shirts with a foil cutter, that cut out the artwork mirrored, so that when ironed on, it showed up correctly.

The below files are NOT mirrored, so if using the same technique, you need to do a few changes to the files before using.

When it comes to the little robot, the shadow/highlights are made so that the artwork works best with light on dark background

Have fun!

/Thomas

how lovely! thank you very much for the fast reply! i will definitley print my own, but i'm gonna use the same process as with making a pcb using print tonner! thank's a lot!

I'll ask flummer about it.

That would be super dope if he has any shirts leftover. Maybe inquire for me as well?

I don't have any shirts, but feel free to make your own with the artwork I have uploaded above.

If there is a bigger interest in iron on logos, I can look into having some printed, ready for easy application with a hot iron or heat press.

Making them with a foil cutter takes too much time for mass production, and streaches the limits of the machine I have access to, too many small details.

/Thomas

We'll definitely have to figure out a way to make shirts again this year for Maker Faire.

These will make many cheap t-shirts ubercool :)

Wow I live in NYC and just did miss out on the mf.. I'm Joe by the way and am new to this site. Glad to have found a place where I can keep a log of my project(s). Chiefdaddy

Hey Joe, welcome to LMR! Have a look around and please do post your projects. If you haven't done so already, take a look at the rules posted at the top of the site for some guidance.

Too bad you missed Maker Faire. This was my first and I'm definitely returning next year.