Let's Make Robots!

robotic arm

(reposted as forum topic by an admin) 

can i use picaxe 28 into 1 to programme 6 hitec hs 311 servos.



(here's the applicable reply to original post)

By ignoblegnome @ Wed, 2009-09-02 07:44
ignoblegnome's picture
The PICAXE 28x1 has 8

The PICAXE 28x1 has 8 outputs, so you should be able to control 6 servos, as long as you don't need to do much else. There are also dedicated servo controller boards that let you manage multiple servos from your microcontroller, so you don't need to dedicate one output for each servo.

BTW, you should post this as a question on the forums, rather than a Robot page. Until you have started building, you shouldn't start a Robot page. See the FAQ.


Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
sorry, i am new here.

Not a large deal. Welcome to LMR.

Did ignoblegnome's reply answer your question? If you have further questions on this point, feel free to continue on this thread. If you have other questions you are welcome to create other new forum posts as well. We appreciate waiting to post a Robot Project until there is an actual robot to showcase in it is all ;)