Let's Make Robots!

laser cut tracked chassis for Tamiya 70097 motor/gearbox


IMG_1078.jpgIMG_1079.jpgIMG_1082.jpgWell, I got busy tonight and finished up my new tracked robot design! I've been wanting to do this for awhile and finally got around to designing and lasering it out tonight.

 Uses a Tamiya 70097 twin motor/gearbox, Tamiya 70100 track and wheel set and the chassis has built in provisions for either setting it up as a 58:1 or 203:1 ratio on the gearbox.

Parallax Ping is mounted and working.  Strangely, I didn't take any pics with the batteries mounted... I guess that'll have to wait for the video.

Chassis is solid as a rock and has an internal bay for gear, batteries, breadboard etc.

This one took some design effort, but I think it was worth it :-)

 

IMG_1072.jpgIMG_1075.jpgIMG_1076.jpgIMG_1077.jpg

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
yeah i know what shrinking plastic is :) it's even in the start here page! but the "tubing" casca was talking about made me think it was not that. :)

That robot looks awsome by the way. I am in the process of a simular disign only not with the laser cut plastics.

But you will see my robot when I get it finished. I might even take some pictures now while its in progress I have not deceided yet. But on to your robot.

Okay two questions (possibly more)

1. Which chip are you using 28x?

I just had my 40x show up a couple of days ago and thinking that I should have gotten the 28x instead since you can get the starter board for it with the header pins. Oh well I will just make my own.

2. You said that you got the Parallax Ping to work correctly. Did you follow the tutorial on here to do it?

I had an idea for makeing the Parallax Ping work with other chips besides the 28/40x and 8. Though I have not wired it up yet so I don't know if it will work or not.

 If its worth doing, its worth OVER doing!

it's a 28X1

Yep, I used the tutorial here and added some to it (not that my additions to the code are any good :-) )

Isn't that expensive?  Do you own a shop or something?

 

Very cool though, the robot has a very professional look 

I do laser cutting/engraving for my business so I just go out to the shop and recluse :-)