Chillout Zone
Let's Make Robots!
Home » Forums » The 4 elements » Mechanics

Building plans for the tamiya tiwn motor gearbox

, , , , , ,
Forum topic
By lordofthedonuts

September 27, 2008
lordofthedonuts's picture

I built my gearbox in the wrong configuration, it was 3 months ago and I lost it... Does anyone have a JPEG a PDF or anything else of the plan for that gearbox ?

 

70097

Tamiya part number.

‹ shaping polymorph using paper templates Treads? ›

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
By lordofthedonuts
@ Sat, 2008-09-27 20:40
lordofthedonuts's picture
The pictures where good enough and I didn't lost any parts, my gearbox is done, thank you!
By Robotfan
@ Sat, 2008-09-27 16:39
TAM 70097 2
By Malon
@ Mon, 2009-01-05 00:09

Is it possible to get a larger image of this? I can PM you my e-mail... I've also lost my instructions, and squinting is hard. :P

 

Thanks! 

By Robotfan
@ Sat, 2008-09-27 16:38
TAM 70097 1
By Robotfan
@ Sat, 2008-09-27 15:52
Send me your email, I'll send JPEG.  I can put here if I shink images (650k rigth now).
By lordofthedonuts
@ Sat, 2008-09-27 07:50
lordofthedonuts's picture

It's a bit small, and in japanese, but I just need to know where to put the axle, it should be ok, thank you!

 

I just hope I didn't lost any part...

By ezekiel181
@ Sat, 2008-09-27 14:58
ezekiel181's picture

Robologists picture shows where the axle goes. You can see Aタイプ　Bタイプ　and Cタイプ　pictures with the ratio next to it.

If its still no help I can take a picture and upload. I`ve still got my guide hanging around here.

By robologist
@ Sat, 2008-09-27 07:46
robologist's picture

050110tamiyabox.jpg

Not sure if that will halp., but closest I'd found.