Let's Make Robots!

tractor-trailer coupling with power transfer

This is an idea for two (or more) cooperative robots. One passive bot (with wheels, but without motors) and one active bot (with motors). The motor-bot (the tractor) would pull the lame bot (the trailer). The trailer has a power source on board. The tractor wants to recharge its battery from that source.

The big idea is so big, I won't even mention it here. Yet.

One of the necessary and mission-critical components would be the coupling of the two machines. In my design I want this coupling to be strong enough for the pulling AND I also want the two bots to share electrical power through the coupling. The mechanism must be robust and reliable. I want the tractor to be able to perform the entire coupling maneuver without my help. And also the de-coupling. So the coupling must also be fool proof.

Look at these designs made in a rapid prototyping material called pizza box.

design.jpg

That was the initial flat version. The red/black markings indicate where I would place conductive materials (e.g. copper plating). All the rest is electrically insulating (wood, plastic, chewing gum).

I recreated the "mushroom" in a taller version, so I could actually test the coupling/decoupling.

closeup.jpg

 

Here is how they "work".

straight-1-4.jpg

straight-5-8.jpg

 

And here you see how well the coupling works (even I were surprised) when the approach is not perfectly aligned.

diag.jpg

 

Feel free to use these designs, even when I do not. Also feel free to post your results on LMR!

8ik

 

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
Rik, stop reminiscing the old days and tell us about your tractor-bot progress :D
busted 8-)