How to make a robot gripper
**Watch the video!**
To make this project you will need:
- A small blow torch or lighter
- A glue gun
- A Dremel or rotary tool
- A few rotary tool bits(drill, sanding wheels and a cutting wheel)
- A permanent marker
- The Cutting pattern(can be found here http://kattejuice.deviantart.com/gall... )
- A micro servo
- 4 small nails or pins
- A piece of Plexiglas (acryllic, 2x2 inches or 10x10cm)
- A large paperclip
- And some sealing tape
If you dont have a rotary tool use a drill, some sanding paper and a fine saw.
This project is very cheap too! it only costs about $10!! :D
Heres the prize list:
A micro servo -$5 to $10 (mine was $6!)
4 small nails or pins -FREE
A piece of Plexiglas -$1
A large paperclip -FREE
Some sealing tape -$1
If you are new to robotics please go see my other videos: http://www.youtube.com/watch?v=hMXTs-...
or this: http://www.youtube.com/watch?v=D1spea...
or this: http://www.youtube.com/watch?v=2wJ8EM...
and dont forget this: http://www.youtube.com/watch?v=VAATI2...