Let's Make Robots!

The Phoenix CNC machine

Cuts designed robot parts

Hi all,

Phoenix is almost ready for prime time, mechanics almost done aside for e few things here and there.

Some pictures below...

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cheers! 

Will be updating ... stay tuned.

 


 

Update 14-02-2011 - Richard gear offspring 

This weekend I think I managed to finish alignment on all axes (well as close as possible), broke the 1 mm bit trying to cut gears in polystirene ... yeah plastic melts when the endmill get's hot (dooh) ... so I think I'll skip plastics for now....

However I have good success cutting gears in 3mm HDF sheet with a 2 mm end mill the result looks pretty nice:

The above was fresh out and made in a hurry ... no belly buttons either :) But the next attempt was better after fixing the aligment. Picture later when I'll get home. 

So using a 2 mm bit means bigger gears, next month or later I'll get a new 1 mm bit and have another try. 

Next to concentrate on creating a gearbox, with a 10/1 or more reduction so I can use my little gearless cdrom drive motors with it.

 


Update 15.02.2011 - PCB milling! Sure ... but after flattening the table :(

 

 

So last evening I have decided to have another try at doing PCB's.

It works better than before, pretty good actually. But before I can really start doing any serious stuff I need to surface the table because while it seems pretty flat it has +- 0.1 mm variations here and there causing milling depth variations. In turn those cause some tracks milled way to deep and others not at all, and this jobs needs at least 0.1 mm accuracy to get finer detail for SMD parts (QFP32 anyone?). 

Flattening is definetly a weekend job as it takes an hour or two so next PCB attempt will be sometime after I manage that. 

All in all I think it works pretty well ... unless otherwise prooved ;)

On to gearbox and other robot parts design... finally. 

PS: Some low quality milling video added ... not much detail but you get the general idea :)

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

So what are all the differences from Valkyrie?  Looks cleaner, with laminate !  But what else?  What is the max travel speed for your setup?  Are you going to make another Richard Gear?

... very obvious changes aside from aspect. Can you spot them?

I will update with all the details when I get the time.

She's a beauty !!!

... she says ;)

It could look better but in my projects functionality is of highest priority :)