Let's Make Robots!

PWM IC simulation.....

please i need the library and model of sg3524, sg3525 sg2525

 

i need to simulate this IC...for motor driving, i cant jump directly on miCro controllinG...

i am using L298 for motor driving, and for input using PWM...

there is a lot of confusion that , some are saying even data sheet that for controlling speed , u have to give pwm on enable pin on L298,

but some saying , for speed controlling, u should give PWM on input pin 1(forward direction) and for reverse give pwm on input pin2 , and keep enable high....

 

help is required.... 

but plz tell me info about SG3525 simulation.... for pwm

^Thanx is AdvancE....

http://www.datasheetcatalog.org/datasheet2/3/06ldp1xcssiphfp0xiy53d1ce9py.pdf


Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

thnxxxx,.,.

 

but, I would use the suggestion to use PWM on the enable pins as that will allow you to control the speed of the motors in forward or reverse easily. That is the most straight forward way to control your motors.