Let's Make Robots!

Feivel

TheCowGod's picture
Seek the brightest light in the room
Cost to build: 
$20
Time to build: 
5 hours

Feivel was my very first robot. He's a little phototropic (light-seeking) robot built into an old computer mouse case. I'm nowhere near clever enough to come up with the simple circuit that controls him -- it's the classic 'Herbie' circuit by Randy Sargent, using an LM386 op-amp (originally intended for use as an audio amplifier) to read the difference in light level between the two infrared phototransistor 'eyes' and use that to split the voltage between the two motors. When both eyes are seeing the same amount of light, the 9V gets split evenly into 4.5V for each motor. When one eye sees more light than another, the op-amp directs more voltage to the motor on the opposite side, which makes the robot turn towards the light. The end result is that Feivel seeks out the brightest light in the room. It also has the added side-effect (as you can see in the video) that when he finds himself on a shadow with bright floor on either side, he'll tend to follow along the shadow, since neither eye wants to move into the shadow. Emergent behavior!

One surprising fact I learned while working on this robot is that, just like a motor will also function as a generator (and vice versa), and a speaker will function as a microphone (and vice versa), LED's also function as light sensors. Any plain old LED will produce a slight voltage across its pins when exposed to light. The 'eyes' on Feivel are actually the infrared emitters that used to be inside the mouse to determine the position of the ball -- it turns out that the emitters work better than the receivers as general light sensors. Crazy.

Since this was my first robot, I took a bunch of pictures of the entire construction process. Since I have no code or programming logic to share for this one, I'll just post some of those :)

Prototyping the circuit

12131

12133

 

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
If you got the money and the parts to make a new robot, same type, it would be cool if you could make it with shadow sensors. Instead of chasing light, it would go after darkness? Just a thougt :D
TeleFox's picture
No need for new sensors, if you wire the originals in backwards you get a dark-seeking bot instead =)
Prettybird's picture

I will always have some analog in my blood and respect creativity. I may want a simple schematic. I am thinking of coupling 2 sharp IR sensors in a similar way for a different application. I am now building my 3rd robot from stuff laying around. That may be a way of using up less I/O pins and have used the 386 in the past.

 

Did u make a post about how to make this little guy?its awsome and i wanna try making one,so if u have made the post could u send me the link or if its not too hard to post it here.

10x a lot

keep them comming XD

sumit3pat's picture
how can i get the actual circuit diagram to make it fulfil for real use.

hi I am from turkey I am electronic student I just started this job, please,please,please,please, please circuit diaram

thank you...

Mike's picture
The circuit diagram can be found in "The Absolute Beginners Guide to Building Robots" and several places on the web. For example: http://www.solarbotics.com/projects/circuits/2007/07/circuit-herbie-by-randy-sargent/
kanoa777's picture
um can you post a video showing how to do this that would be gr8

Hi Fritsl and TheCowGod,

I was hoping I could get your input. I am making a robot with this schematic (as posted above): http://downloads.solarbotics.net/misc/herbie1.gif

but instead of detecting light I would like to construct it to seek out a flame (i.e. a candle). Now I was wondering, can I do that simply by replacing the photodiodes with some type of sensors that detect fire? I think it would work but I'm not 100% sure. Let me know what you guys think. Thanks :)

TheCowGod's picture

Er, did you watch the video I posted above? I'm not sure if I'd want to set a skittering robot chasing after a candle. What do you imagine will happen when it finds it? House burns down :)

The circuit works by comparing the voltages on each of the two diodes, so you should be able to drop in any sensor that varies its voltage output based on what it senses. If you use something that varies its resistance, then you'd need to use it in a voltage divider to produce a voltage change.

Dan

awesome! now I can give it a shot. I plan on making a basic firefighting robot. It will seek out a candle flame and blow it out with the help of a fan. I'll let you guys know how it comes along. Thanks again Dan and Frits! really appreciate the input! :)
fritsl's picture

Yes, it can be done :)

You will need a thermal sensor. I have no clue to electronics, I just buy pre-made boards and put them to work with each other.. And so I have no clue what your schmatic should tell me.

This link may help you: http://www.robot-electronics.co.uk/acatalog/Thermal_Array_Sensor.html

Note that you need to detect IR radiation - NOT temperature :)

.TheWiz.'s picture

pretty cool mouse bot!! I been wanted to build one of these for a while and i was thinking,

is there any possibility you can use a dpdt miniature pc relay 12vdc coil will these burn out the little hobby motor's 1.5-3vdc motors using a 9v battery?? just a question looking a answer. Thanx . And your Feivel packs a punch fast little mousy.

fritsl's picture
It will be very fun & fast.. and die young! :)
Nebster's picture

hey cow god id like to make one of these but do i really need that relay .

like can you post a circuit that doesnt use a relay cos i cant get one and its out of my price limit... 5 BUCKS!

if you could do that it would be great. =)

TheCowGod's picture

One place you can often find 5V relays is on old computer modems. They were used to switch the signal between the telephone jack and the modem jack.

But it's true, the relay isn't needed for the general "run around and chase light" operation of the robot -- it's part of the circuit that backs up if it runs into something, but I found that I didn't have space to glue on the 'whisker' that would trigger the bump switch on mine, so I'm not even using that whole part of the circuit. If you don't want the robot to be able to back up when it runs into something, then you can leave off a lot of the components -- basically everything up at the front of my robot (the relay, capacitor, resistor, transistor, switch...).

The original circuit designed by Randy Sargent is available from Solarbotics: http://downloads.solarbotics.net/misc/herbie.txt . It's just like you're asking, just the op-amp part without any additional circuitry for backing up. Hope that helps.

Nebster's picture

AWSOME

that looks great thanks cow god ill post my robot in about a week or so.

it will be CRAZY!

Too bad you cant pimp it with lights or it would go nuts.  thanx for that.

this is pretty good too. http://downloads.solarbotics.net/misc/herbie1.gif

TheCowGod's picture

Cool, good luck, looking forward to seeing it.

That image is great. It really makes it clear how the op-amp is controlling the two motors.

BTW, as far as adding lights, one modification I read about (assuming you're using light sensors that are sensitive to infrared light, like IR phototransistors) was putting an IR LED on the tail of the mouse, then building a second mousebot. The second one would tend to be drawn towards the big bright IR light on the butt of the first one, so he'd follow around the first one :) As long as the IR LED is pointing backwards on the first robot, it shouldn't affect the light sensors on the front.

fritsl's picture

Aarh, hell, I love him too!

/ Frits

fritsl's picture

So much love in here, I don't know if it is nice or scary?

/ Frits

TheCowGod's picture
Haha, yeah, probably scary. But I appreciate it all the same :)
jip's picture

Man, CowGod, I already love you :-D... You make some pretty cool robots!

Can't wait to see more of that kind.

- Jimmy

fritsl's picture

So THAT's what they are for:

http://www.solarbotics.com/products/pret/

- And no gears!?! Seems surpringly effective!

/ Frits

TheCowGod's picture
Aha. Yup, that looks similar to what I used. Mine were just the rubber feet from an old joystick that I pried off, rubbed off the sticky stuff, and poked a hole in them with a nail.
Cappy's picture

Now this is a fun robot! It's simple but with great effect. I really like it. In fact, this is my second favorite so far (after the YDM of course, nothing beats that beat). 

 


We don't stop playing because we grow old, we grow old because we stop playing.

TheCowGod's picture
Hey, thanks. And I agree about YDM, that thing is just too cute :)