Let's Make Robots!

Little Black Box

Avoid walls, look cool with shiny LED's

10/12/08 

This will be my first robot with a brain, unlike my first attempt at a robot which just had 4 transistors for its extremely basic operation.  I'll be using an Arduino, or more specifically the generic "Really Bare Bones Board" from Modern Device, which is considerably more affordable.  Some people refer to these generic boards as "Freeduino."

After my Solarbotics order arrived the other day I was so anxious to play with my cool new robot parts that I ended up building for a good chunk of the day instead of working, which I was supposed to be doing.  But I completed the chassis for the bot already, built out of the 3mm expanded PVC I ordered.  Some of you may have seen pictures of the parts here:

http://letsmakerobots.com/node/2838#comment-10307    :P

This will be an "arty" robot, as the lingo on this site seems to go, since I'm putting LED's inside the body and behind the eyes to create some cool effects while it moves.

Videos and more photos to come.  Stay tuned. 


 
I put the motors in and the wheels on.  I'm still trying to find a caster small enough to work as a third wheel. 
 
Oof ok so this is a terrible quality photo (cell phone pic) but I'm lazy and tired right now, so I'll upload a better version tomorrow.
 
3026383055_c64a1500e0.jpg?v=0 
 
This gives you an idea of what I'm going for.  I'm going to put blue LED's inside, one pointing through each wheel, so that when they spin it makes a cool lighting effect.  :D 


 10/20/08
 
Built the head this evening.
 
3047869518_5700cc2de6.jpg 
 
I'll put blue LED's in the head for backlit eyes ... perhaps I'll have him "blink" occasionally for added cuteness.  :)
 
Also, I've soldered the Really Bare Bones Board together.
 
3046814191_49bcb9e31a.jpg?v=0 
 
Actually there's one small detail missing in that picture ... 4 of the female headers.  I dropped them somewhere and don't feel like getting on my hands and knees to find them under my desk just yet. 

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
ahh..under the bot...I would say if you could, mount it on the front/back side.... whichever doesn't through it off kilter...
So you could call it LB2-RB3.  I know, lame.... ;)

All I can say is... Recessed wheels! Sexy!

Seriously, that is a damn nice chassis, it's going to be a awesome bot!

 

Thanks, Chris.  :D
Looks great. I'm really looking forward to seeing a vid with that LBB (little black box) moving around. I'm especially curious how those blue leds will look behind the wheels
Aha, more expanded PVC construction. You're gluing it together? What are you cutting/shaping it with?

Yes, I'm gluing it together with 3M Scotch Maximum Strength Adhesive.  Takes about half an hour to dry, and holds really strong.

As for cutting I just used an exacto knife.  Takes about 4 or 5 passes to cut through it, but it's fairly easy material to cut.  Of course I meticulously pencilled the lines, but I also used a ruler for the first couple passes with the knife.  Helps get a perfectly straight edge.  The half circles were kind of tough, but with patience it can be done with a pretty clean finish.  Then I lightly sanded the curves with my Dremel to get rid of some of the frayed areas.

When I start working on the head I'll need to make some very small holes for the Ping housing.  I'm going to try to do that with the cutting tool on the Dremel.  I'll let you know how that goes when I get there. 

I made the holes for the eyes in Edward with a drill (rather large drill) and then expanded the holes with the sanding tool on the dremel. That way you get smooth results. Off course. you'll have to find a drill that makes a big enough hole for the sanding tool to go through

That's a great idea, actually.  I don't own a drill but I can borrow one from a friend, and the largest bit just might be slightly larger than my smallest Dremel sanding attachment.  Thanks for the tip.
I surely thin you should name this one "the black box". Things called what they are is nice :D