Let's Make Robots!

My First Robot

walk

This is my first robot. I build it in a few hours and it it most mechanic.

The bot is made using two servo's and a few pieces of wood and plastic.

 

If you look at the picture you see a piece of aluminium, this is to make sure the robot goes forward. It works, because the aluminium will slide in one direction and causes friction in the other direction. And I want to thank the people who helped me to get the servo's to work. the code: #include Servo myservo; // create servo object to control a servo Servo myserv1; void setup() { myservo.attach(9); // attaches the servo on pin 9 to the servo object myserv1.attach(5); myservo.write(90); // sets the servo position according to the scaled value myserv1.write(90); delay(1000); } void loop() { myservo.write(70); myserv1.write(70); delay(750); myservo.write(110); myserv1.write(110); delay(750); }