Let's Make Robots!

Rotary walker entry for Rescue Robot Challenge

 
Navigates simulated disaster zone and picks up ping pong balls

Challenge

            The premise of the Rescue Robot contest is to construct a remote controlled vehicle capable of navigating a playing field filled with obstacles in order to retrieve ping-pong balls.  The playing field is 18 feet by 10 feet and the obstacles that must be navigated include a 45-degree slope, an area filled with pea gravel, a 6-inch high wall, and a covered cave area.  Each contestant must collect four ping-pong balls from 4-inch tall pick pylons and place them all on a single drop pylon.  The contestant to move all four balls to the drop pylon first wins the round.     

 

Solution abstract

            My entry in this challenge has been scratch-built to meet all of the requirements in the most effective, yet inexpensive, way possible.  To traverse the difficult terrain my robot uses a versatile rotary walker locomotion method.  This allows my robot to have the same capabilities of a robot with treads without any added weight or worries about gravel jamming the treads.  The majority of the robot is made using strong, yet lightweight, PVC plastic, and this lightness also aids in getting over obstacles.  To navigate the “cave” my robot is fitted with a camera that transmits its image back to a real-time display.  This lets me fully control the robot even when visual contact is lost.  The final element of the robot is a versatile arm which allows the robot to easily pick up the ping pong balls yet still precisely set them down on the drop pylon.

 

Design

            One key element to any robot is a versatile platform.  I have chosen not to buy a kit-based platform but instead build a custom one, which is incredibly powerful for its weight.  The construction is mostly PVC plastic, and in order to save weight the frame has holes cut out in areas not key to the structural integrity.  The platform uses a rotary walker mechanism for locomotion.  To my knowledge, there are no well documented robots that use this type of locomotion, and as a result a lot of work went into refining the basic idea before a working model could be built.  The advantages, however, were worth the time.  The rotary walker mechanism gives the robot a large surface area that has contact with the ground.  This spreads the robots weight evenly, allowing it to quickly cross shifting and unstable terrain such as the pea gravel in the playing field.  The extra contact area also aids in climbing up the steep incline on the course.  The robot also has a motorized “tail” which can lift the back of the robot up to help in climbing tall obstacles such as the 6-inch wall.  In addition to impressive capabilities, the platform is also simple and durable.  Because of the design, rocks and debris do not get jammed into the mechanism as they often do with treads.  Also, two motors drive each side, so if one experiences failure the other motor can still drive the mechanism without problems. 

            Mounted to the platform is an arm with an equal amount of innovative touches.  This arm can rotate a full 360 degrees, as well as raise and lower.  The servo that rotates the arm is geared down to allow for precise control, and the 4 joint mechanism which raises and lowers keeps the claw level with the ground at all heights.  To make the robot versatile, the rotating part of the arm contains mounting points that allow the existing claw to be easily swapped for a different one.  The claw for this robot is designed to be able to pick up a ping-pong ball easily without precise positioning, and yet still very precisely drop the ball on the place pylon.  It can do this because the claw opens in two ways.  One swings the claw wide open, which is ideal for picking up a ping-pong ball on a pick pylon because when it closes from this position any ball in the general area will be snatched.  The second way that the claw can open is a more gentle motion where each half of the claw opens slightly then swings up and out of the way.  This is ideal for placing the ball on the drop pylon without knocking all the other balls off.  The dual-opening mechanism is driven by two regular servos with just 90 degrees of rotation; it is a clever hinge mechanism that allows for a complex motion despite limited servo movement.               

            To control all of the robot’s functions a simple Play Station controller is used.  This is familiar to many people, meaning a complete novice can learn to accurately control the robot in a short time.  The real time camera allows the robot to be controlled out of sight and in tight places such as the “cave” where the robot is not visible to the operator.  The image from the camera is displayed on a portable color monitor.  A bright LED light allows the camera to still be useful when the area is dark, and a fish eye lens allows the operator to see more of the surroundings in the display.  To help make controlling the robot over the camera even easier a red colored LED shines on the area below the claw, so if a ping-pong ball is the correct distance away for retrieval the ball will be lit up red.  To power the robot a RC airplane lithium polymer battery is used, which is very lightweight.  One charge lasts about twenty minutes per battery, and because this robot uses a standard connector plug a higher capacity battery can easily by swapped in if more duration is required.  This robot is easy to operate, versatile, and costs under 300 dollars, which is significantly less then the competition.   

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
I wasn't able to watch the last video but I knew that it was probably pretty cool so I went ahead and chilled it.

Hey thanks man :D

Check out this robot from 2007: https://www.youtube.com/watch?v=hy3ZxT90-p8

This could be used as an ATV if scaled up!

Cheers!

Nice bot

Best Of luck for the challange...!

The completed robot looks very good and I wondered how you did in the competition.

I hope you did well.

 

I placed 5th out of around two dozen.  My main problem was my driving, which needed a lot of work.  I'll post a video with a few short clips from the contest soon.  

The video clip looks pretty good. My condolences that you did not win.

 

I don't know if you came up with this kind of locomotion by yourself but it is pure genius.

You are obviously a very talented person ;)

One might even say that "Engineering is strong with this one!".

I disagree with BotFIN, this is not an arty robot, it is both techie and arty.

It's been snowing a lot over here in Eastern Europe, in some places the snow has completly covered people's houses and I always carry a shovel in my car - helps with parking. A robot like yours would be really fun to drive around in the snow. There are several improvements that could be made, like bending the slats in such a way that they come down flat on the snow or adding tires to the drive wheels so the robot can drive smoothly on flat surfaces... I hope I can find the time to build my own version before the snow melts.

Here is a picture of a house:

House in Romania

If it is arty and techie bot, then it is arty >:)

Thanks.  And with everything I build I achieve the task first, then focus on aesthetics.  Vary rarely do I make decisions that sacrifice the function of the robot just to make it look nice.