Rover 5 Motor running backwards
I have gotten around to running all four motors on my Rover 5 at the same time. One of them runs in the opposite direction to the rest :-/ (see my robot post)
While I guess I could negate the direction in the code, this seems fragile. How do the motors work? Is there a simple way to reverse it? (reverse the polarity of the power pins?)
@ Sat, 2012-02-04 14:47
same
I too have that problem, lucky us!
@ Tue, 2012-01-24 13:31
It seems that the connectors
It seems that the connectors on the rover are not wired to be connected to the dagu controller...
@ Tue, 2012-01-24 16:32
I designed the chassis and I designed the controller
No, just a case of an uneducated Chinese laborer accidentally soldering the wires back to front. It only takes a minute to unclip the wires from the socket and swap them over.
@ Mon, 2012-01-23 20:39
Like Chuck said I'd just
Like Chuck said I'd just reverse the wires of the motor.
@ Tue, 2012-01-24 01:36
I was hoping it might be
I was hoping it might be something like that.
@ Mon, 2012-01-23 10:33
umm
revers the wires on the motor