Let's Make Robots!


this is the base as you can see, it's not too large (took me a million years to cut the two plastic circles! )

down here I put the second and the third set of servos. I actually ordered 12, but one got broke so now i'm waiting for another. This is a novice mistake, to know for the future!

down here I added cables and to communicate with Arduino, and a home made circuit board.

this is the top of the board, there are plenty of wires! At the top of the body there will be the radio-receiver, and the battery holder. At the bottom I plan to put the arduino uno.

Here is another image, it's almost finished. I finished a part of the programming, soon it will be ready for expertimenting:). 

Here is the front, the "abdo", where I put the arduino. There are lots of wires, and that scotch tape doesn't look cool, so I need to buy some things to group them.


I miss a servo right now, I'm still waiting for it, should come monday or tuesday.

Finally, the servo has arrived. :D

And my robot is finished!



Now I made a mistake. Shit. The shoulders, which are attached to the first and the second set of servos, are made of plastic and it bends under the heaviness of the robots. Need to buy 4 wooden blocks, or sth more solid so the robot would finally have the posibility to walk.

This is the final shape of it:

This photo up here shows the robot completely finished. I took off the radio receiver, it didn't work very well, and changed the "shoulders" with a more resistant material:

I screw the servos and then stick them on.

This is an image of the underside of the robot:

I'll buy an RC car, to make the robot to be radio controlled. Until then I'll write the program for walking.

Videos soon ! :D

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

triangular awesomeness. joking lol. maybe kýklos, greek for circle

really lol at that name :)), but thanks for the greek one, i will think of it.