Let's Make Robots!

Free PCBs looking for a good home

I accidently sent the wrong Gerber files when I ordered some PCBs from http://iteadstudio.com/ so now I’m stuck with 14 boards that I don’t need.
Lesson to be learned : Don’t order PCBs late at night after a 6-pack of beer…

This was my first DipTrace project and I do believe they work. I have not tested the board in detail as I had started another project when they arrived. These are the same boards that I mentioned here

A brief description of the board:

  • Uses a PICAXE 18M2
  • An SN75441ONE (or an L293D) H-bridge
  • Programming interface broken out to 3 pins
  • Most of the pins broken out to a header
  • Headers for 5 servos
  • Power regulator for the servo power (no cap’s so I don’t know if it works)

I have attached the schematic

So I’m giving away 14 boards for FREE. Just send me you shipping address via the contact form http://letsmakerobots.com/user/10562/contact and I’ll send you one. If more than 14 people shows interest I’ll probably make a draw or something.

PS. This is just the blank board and nothing else, with no guarantee whatsoever.


SMC.pdf34.52 KB

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

I must admit that the footprint used for the resistors on that PCB is a bit on the small size. The drill bit used is small and the solder pads should be bigger.
I have changed the footprint for other (new) designs, but as this was my first PCB I didn’t notice it then.
Are you sure that you are using 1/4W resistors?
I might just send you some resistors or even solder some on a new board :-)

I dont know of they are 1/4W resistors i just got this box with resistors.

How is this size compared to your resistors?

It's the same size but i have a different color code, i have yellow-purple-red-gold. and thats the 4.7k resistor

I'll send you this card next week so you can get started.



Did you send it already? Because i didn't get anything,

I sent it yesterday.
After all this is free and I even pay the shipping so you need to be a bit patient.....

I'am sorry, i didn't meant i like that i though maybe there's something gone wrong at the post office.