Let's Make Robots!

Charging batteries

Hi I would like to make something which can be charged Without taking the batteries out of the robot. I am thinking of using nimh batteries as I have heard that lipos are crazy and hard to do. I have read bait about this but all I have heard how powerfully to charge them and things to d with trickle charging and making sure u don't over charge the batteries but I don't anything about the very basics, like I have absoloutly no idea what I'm doing How can I charge the batteries whilst they are in the robot with out applying all the power to the robot? In most things the batteries go alternate ways but in charging I've seen the all the same way And just the general basics like actually getting the batteries to charge (hooking them up the right way e.t.c.) Thanks for any thing you can sayall help would be appreciated.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
ducksrule's picture

what do u think about battery packs and other things should i just use some regular nimh batteries in a battery holder?

 

ducksrule's picture

does anyone know any cheeper options as these are not availible for sample anymore

Maxhirez's picture
I had a pretty simple setup with aRDui5X where contact with the charger threw the switch in a DPDT relay and held it until you pushed a release button or turned him on/off.
JAX's picture

WTH this was a most useful chip. There better be a good replacement for this thing. I hope it's not another good component that gets phased out inexplicably.

ducksrule's picture

no free samples oh well

ducksrule's picture

:)

Chris the Carpenter's picture

I got the version of the Max713 that was available as a free sample. Dunno which one it was.

Don't let all the math and stuff scare you off. In the end, it is really just 2 inputs that need to be jumped correctly and you have to do a little math on a couple resistors --these things determine charge rate, tells the chip how big your pack is, max charge time etc. Ezekiel did a really good job laying everything out --just copy his stuff and substitute your values. 

ducksrule's picture
Ooh urr sorry there's loads Do u know the difference. There max713c/d, max713cpe,max713cpe+ e.t.c. Any ideas
ducksrule's picture
thanks that was just the kind of answer i was looking for (Wow that looks awful complicated which should keep me amused and hopefully not too confused for quite a while :D )