Let's Make Robots!

My first robot

AttachmentSize
30012013158.mp41.72 MB

This is my first robot :)  very simple line follower using 2 photoresistors and atmega microcontroller, I used a plastic box as chassis and two plastic nuts as wheels, powered by 2 nokia cells 1 for the controller and the other for the servos.

 

 

the sensors

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

I am poking fun at you, but, in a good way. There is no reason for expensive parts to learn with. :) You have gotten farther than I have, and, I have been here for a number of years. :)

In case you didn't get it from my statement. Good Job and Good work. :)

in my case, as a student, you know i try to keep it as cheap as possible, and I'm glad you like it :)

Good work. i like your setup too

Thanks :)

Well done, even if the microcontroller is a bit overkill :-) However, important is that it works and you have fun. Good job!!!

I agree with you, but it will not be just a line follower i will keep improve it, and now im working on adding avoid obstacles.

Nicely done :)

I would enjoy seeing a video of it running a longer course.