Let's Make Robots!

Dagu Robotic Arm 6DoF - Bacuri02 Project

I recently received my Dagu Robotic Arm 6 DOF with Arexx control board 32 servos.

My original project is to use an Arduino Mega to control the arm and then make a wifi connection joystick control.

As I have not received my Arduino Mega board, I started tinkering in Arexx control board that I received along with the robotic arm. Along with the kit also came with a CD ROM which I believed the program to be installed on the computer to control the arm.

But I found that the challenge is much bigger than I thought ... I can not run any of programs CDROM, I tried on Windows7, Linux, and anything ...

I researched and came in the Arexx website (http://www.arexx.com/robot_arm/html/en/documentation.htm#manual) exactly the website of robotic arm 6DOF and I thought I had solved all my problems... But I found more of a challenge! Unable to install anything that is there in the website of control board maker that comes along with the robotic arm. 


I did not give up and now I want to run this Arexx PCB with arm control by the computer, one way or another!

I will keep searching but if anyone can help me, I appreciate it very much.

Unfortunately I had another problem, which was to have received the robotic arm with loose screws, especially in the claw fixing and servo fixing, but I solved it without major problems, despite the hassle.

I hope to enjoy more than the hassles I'm having now. But let us face the challenge!


Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Thanks HaZZa, I will search it!

3 years ago, I bought a Dagu arm and it came with a 32 servos controller wich was basically a clon of the Lynxmotion SSC-32 controller, if is the same case for you then you can control it just like the lynxmotion with serial commands, google it you'll find the manual of the controller.