Let's Make Robots!

120:1 Mini Plastic Gearmotor Offset 2mm Spline Output


Vendor's Description: 

This compact, inexpensive, low-current gearmotor (brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. At 4.5 V, it has a free-run speed of 120 RPM and a stall torque of approximately 20 oz-in (however, the built-in safety clutch might start slipping before the stall torque is reached). The splined output shaft has a crest diameter of 2 mm and is offset from but parallel to the motor shaft. Though the product picture shows two gearmotors, this product is for a single motor.