Let's Make Robots!

Robot Wall Racers

Finds the hidden racing track in every room.. and races it!

This is updated, reason is here


 

A video in better quality than YouTube & Google is here

How to make Robot Wall Racers yourself, see here

The car-chase was made by holding a camera on a stick, chasing the cars around. Some clips where made by placing the camera on a record-player. All editing was done in the standard "free" program that comes with a Mac, called iMovie. It is a nice program for light editing.. but phew, it was pushed to make this

The second video shows some work with the skid-turning. It also shows improved handling in general.

Notice how it sometimes mis-judges when the wall is not 90 degrees, but has bumps. But also how it handles getting out again :D (Me proud, love this, think it is cool, it drives so much better than what I can do with remote myself)

Of course I could just give it some more space to turn in the code, to drive more "safe", but I kind of like it to be tight :) And notice hw it never bumps into anything else - the polystyrene-blocks would fly right off if it hit them.

I have added an extra battery for more power.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Your home is a racing track, you just do not know it.

Look at your floor where it meets a wall.

Between 30 and 70 cm from that goes an imaginary path, following along the wall.

That is the racing track!

Where the wall meets another wall, or there is an obstacle, the track follows in a smooth path, always 30-70 cm away, on the floor.

The track returns to where you started, you see! :)

It is a full racing track:

You can time how long time it takes for a little robo-car to take one round. You can then try to improve the code, and time it again.

 

If you make the car like this:

One sensor (Could also be infra-red or whatever) looks ahead, another looks to the right. Then code could be something like this:

main:

If something in front, turn left, go to main.

If something closer than 30 cm to the right, turn left, go to main.

if nothing in front and something closer than 70 cm to the right, drive ahead, go to main.

If nothing to the right closer than 70 cm, turn right, go to main.

 

A car is racing your home!

It can be timed how long before passing by the same line again and again.

But a single car is just test-labs, no?

 

Now take 2 cars with the excact same setup as above, let's say a red car & a blue car. Now it get's interesting!

If red car is behind blue car, what does it do?

Well.. Something (blue car) is in front, so we turn left to take over.. until nothing is on the right, so we pull back.. That is trying to take over!

At a point the blue car is turning left because there is something in front.

Then the red car will have the inner track..

 

What is actually going on, is that one car is behind, but is "strugeling" to take over.. when it is in front, the other will fight to get ahead.. and we have a full race :D

You can take Red & Blue and place them next to each other, next to the wall; They will both drive full speed ahead, until a turn, where the inner car will have advantage. But then..

Wall Racers are born, ladies and gentlemen.. I had these 2 cheap RC cars with crap maneuvering abilities, and thought of what I could do with them. Crap - but still; They sort of drive like cars - not like differential steered robots.

It has ben quite simple, have experimented with AZ8222's instead of motor drivers. And just a Picaxe on a standard board, simple and fast.

Of course, when turning angle is not enough to avoid obstacles, maneuvers with reverse and 3-point turns must be done. But this is why we have a microcontroller, and it is not spoiling the fun - on the contrary :)

 

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Not only that - I am going to win it! =) I think!

:D 

/ Fritsl

Hehehe. What do you think you're going to win with that tiny little thing? THIS will (eventually) do the same thing, but outside in the big bad world!

MinesBiggerThanYours.jpg

God created the integers; all else is the work of man - Leopold Kronecker

(baseoverapex's picture)This is a Tamiya Blackfoot chassis, which was also used on a few other spin-off RC vehicles. Watchout for the "dog bones" also called half shafts that power the rear wheels. These are famous for wearing out on these chassis's. They sell high quality replacements online using CV joint technology. I know off topic, but I've owned 10 of these and had these problems over and over....

Im working on making my nitro gas poered buggy autonomous.  It goes 50 mph and im definately going to put a remote overide on it.  I may put it up on here!♦

Wicked!

What sensors? Let me warn you, even at the low speeds mine are driving by, I was getting close to the limit of the SRF05's - You will be suprised at how much distance is needed to react.

And since the SRF05's in reality do not do more than 1.5 meters, 50 mph will need some good grip from the tyres :)

First of all Thats what the remote overide is for!  Im thinking of using a program that uses 2 webcams to see distance It says it can see up to 4 meters.  it has wiked steering and can stop on a dime.  Its experimental but its gonna be cool!

"The same thing"? My "Wall Racing-concept"?..  or "just drive around and avoid obstacles"? 

/ Fritsl

No. I was having a laugh. I've not considered an entry for this competition, although I probably should. I could use those tracks. 

God created the integers; all else is the work of man - Leopold Kronecker

Sounds like fun!

No guys - you don't get the beauty in the math :)

If any extra, all we need is a bumper at the back to ensure it knows if it is reversing into something when doing a 3-point turn.

So far it is just theory - I had the idea late last night. But I might get the time to build them later today if all goes well - so we will see if it works as I hope :) 

/ Fritsl