Let's Make Robots!

what is wrong?! ..and what can i do!?

okay..         so i just finished my new robot(8 servo quadropod)and started makeing a test program.   when the test program was done i downloaded it to the picaxe and it worked! then i started to try out use the srf05 to see if it was plugged in the right way! so i made another program and tryed it and that worked too! after that test i went ahead and made a autonomus-mode program like in the ""start here" robot"  when i tryed it i got the "reset error" (which i've got many times before)so i did like i use to(and it allways worked) when i reset the picaxe, only this time it didn't work! so i tried again and again and again and again etc.. after trying with no luck i wanted to make sure if something else was wrong! so i tryed to download the program to all my other robots(all 3 robots) and also tryed resetting them but it still didnt work! on none of them!!!         at last i tryed to chek if it was only thet one program where was wrong. so i tried to use another downloading cable...    guess what!     ...it didn't work!!

please help me with this one!   i dont have any idea what else can be wrong then all these i have checked

i've also attached some images


ehh...      i think i just fixed it.. =D    

   it seems like i have one tricky  female USB port..

but anyways i fixed it!!! =D

this_is_a_problem.jpg84.49 KB
this_is_a_problem_2.jpg21.51 KB
this_is_a_problem_3.jpg24.22 KB