Let's Make Robots!

Tag Teaming It


Update on entry for cat-splat challenge.

The tracks were a dismal failure so i went back to basics and knocked up 4 wheels

with a rubber band between them, no tracks but it turns much better on carpet with just the plastic contacting the ground.

I've used one set to make reversing wall sensor with a microswitch activated from the pressure (gotta start somewhere, IR comes later:)   

back.jpg

  

the other set is a set of arms  which can be lowered to drop what its carying.

 front.jpg

 

This is the plan:

 I know Guibot has recently made Ratbot, but it's such an apt name for this project :)

 

 Ratbot above carrys in front of him a small box, the decoy (mousebot) which contains:

a: a small motor with the shaft poking out the top, a short bit of shoelace is attached to it.

b: a 433mhz transmitter

c: a movement sensor (i'll try a mercury switch first)

d: a magnet operated reed switch to trigger the program 

e: driven by a picaxe 08M & a couple of AAA's 

 

 Ratbot drives around the room until he senses a wall.

He then drops mousebot and reverses back in a straight line until he hits an opposite wall then waits.

meanwhile mousebot has been activated from being dropped on the ground.

(i'll use the reed switch as an interupt to start him when the magnet on ratbots arm is no longer detected)

 

mousebot breifly twitches his tail with the motor every 10 - 15 seconds or so, then

when mousebot is swatted/bumped/pounced on by my cat he sends out a distress signal through

the transmitter.

 

Ratbot goes into action and creeps forward with the water squirter ready until he senses the cat, then attacks! 

 

Thats the plan. my current motors are far too noisy to creep up on the cat so i'll have to remake it into a real stealth machine. Knowing my cat if he hears anything behind him he'll probably become real wary, and we can't have that now can we ;)

 ---------------------------------------------------------------------------------------------------------------------------

UPDATE - Havent go the arms working yet but i've worked out the basic code for the most part

it just needs some tweaking.                  See New Video above

 

It's a flamin' noisy bugger, i'll post a forum on the subject as i'd appreciate some ideas about making

a silent-ish drive system.

 

 

 

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.
great idea!! that cat is going to hate that bot !!
I digg what you do! :)
I am glad I have been able to inspire you. I agree about the price of meccano. I ended up justifying the expense in the fact i could use it over and over plus the time it saves on prototypes. I like the use of the tictac box.

yes, further testing has revealed the reason they use teeth on the drive wheel.

I might strip down the chassis and try a 4 wheeled bot with deep grooved wheels and rubber band between them.

I was after a solid reliable testing platform which currently this is not :) 

Will be good to see moving around. How are you mounting the idler wheels?
Great! another 08M project. Cant wait to see this one coming along. Good tip on the tictac box too.