i was trying to see if i could make sounds, LDR-test and ir remote test.
upgrade stuff here: http://www.rev-ed.co.uk/docs/axe040.pdf
but there is a syntax error :(
I had the exact same problem,
the manual does have it's problems with things like this.
symbol infra = b14
irin 0, infraif infra = 0 then s125if infra = 2 then s60goto main
s125:servo 0,125 pause 1000goto main
s60:servo 0,30pause 1000goto main
Read the manual in terms of the syntax needed for the irin. It requires a pin # and a variable. In your list of swon's, the infra with be replaced with the variable you have chosen.
I would start with this psydo code:
--Once you can determine you have clean data coming in, then goto your swon list.