SRF005

I need help on connecting a srf005 (the blue one) to an Arduino MEGA 1280

You can use this image as a guide.

I want the connection for the srf005 using only three pins. :) (The one where you connect the mode pin to ground)

Thanks,

Microbot777

Hi, 

I am wanting to connect an SRF005 to a 28x1. I am basically building a "start here" robot with all of the same parts as the solarbotics kit apart from the range sensor. Is there an example of code with some details on how to connect it to the board? I am new to PICaxe and this is my first project. I have had the servo moving on the 28x1 board and have played with led's and a push-button on an 08m so I am getting used to programming but this is the most technical thing I have tried yet so go easy on me! lol

Thanks in advance ;)

Paul 

okay..         so i just finished my new robot(8 servo quadropod)and started makeing a test program.   when the test program was done i downloaded it to the picaxe and it worked! then i started to try out use the srf05 to see if it was plugged in the right way! so i made another program and tryed it and that worked too!

jubiii!!!   i finally got my robot working but i don't know how i use the srf05/srf005....

i connected it like the drawing i found from "frits1"so that the mini-LED was flashing...   but how do i USE it???

you know...   how can i tell it to do something when the disance is ....cm and then do something else when the distace is ..........cm??       

plz tell me!

also! here is a test of the robot !