Let's Make Robots!

finland

Here's my beetlebot which i call Buglet. I got lots of pics but sorry, they aren't in right angle. First i took parts from my box. Then i went to cut a motor holder … Read more
Analog Robot Controller
Hello! I made a pcb for Aivot - analog robot controller Parts: 2x 2N3904 1x ferric chloride mix 1x printed circuit Lots of pictures: Printed circuit and piece of … Read more
THIS PROJECT IS CLOSED AND PARTS IN MY BOXES Problem solved: Okay so my problem was that motors didn't get enough power. I tested this with 6v and it … Read more

Biped robot

Okay. If you know i am building cheap 4-DOF biped.
If you want to know what would it be,it's going to be like EasyBotics Easy Biped :O 

24.11.2011
I got some ideas and i ordered 4x Hextronik HXT900 servos.
Next thing i buy is PCB making things and PicAxe 14M. 
I make chassis when i get some plastic sheets.
But i can tell you some things:
- It has a homemade IR sensor
- And led eyes
- I can modify it easy to walk and avoid obstacles or be a sumo or dance
- I may add an IR receiver to remote control mode 

Move and bump into things
Hello! This is my second, quick maded robot. I got parts from old toys and matchbox (;D) It's a vibrobot using 9v, big power for small motor. It has some kind of … Read more
Follows the light or goes away from the light
Using a
  Picture from older version: Hello! This is my first robot and i want to show it to you! I have some exprience in electronics before I interested in robotics. I … Read more

My parts

Yes! My parts arrived today and now i got them.

There are over 400 parts in this box (not include picaxe things):

There are ldrs,resistors,electric capacitors,ceramic capasitors,motor driver,08M,transistors,leds,axle,wires and lots of other things what i can use on robots. But still i have to order more parts, motors,breadboard and battery holders.

 

Robot chassis

Hello everyone! Now i finished my robots chassis and i want to show it to you.

First picture is front of it:

And secon is from left side:

And these are wheels i may use on it:

And parts are taped with two-sided tape.