I finally figured out how to program my Arduino controlled "Start Here Robot" clone without leaving my chair using bluetooth. Unfortunately it still only works when … Read more
So I build my first wheeled robot. For now it has no special functions or sensors, but I'm planning to add those features later. Robot can be controlled with PC, … Read more
I have a lot of cheap Radio Control Toys such as UFO, Mimi Cars, Tanks... Most of them are controlled by transmitters running in 27Mhz. I wonder the functions of … Read more
The is the Rover I build. The Rover is able to turn its body and to change the position of so that the underside becomes the upper side. Initially, I use 4 motors … Read more
Well after a long time away from this hobby I am back again.. I am trying to create a little hobby robot that will hopefully eventually be controlled by voice … Read more
This is my school project and I'm going to rebuild this old rc car so i can control it with bluetooth, and i will do so by replacing all electronics inside it wit … Read more
Hi guys this is my quadpod. I'm new with this kind of robot and i need a lot of help. I use lego pieces for the legs and the base. For the logic I used a ssc-32, … Read more
This is DroidBot!, I'm doing some AI research for my University and this is a test bot I put together to test some of my code. It uses an Arduino Romeo to control … Read more
I always wanted to control a tank through my PC or my mobile phone, so this is it....
I used an arduino with L293 h-bridge on a protoshield , a cheap bluetooth … Read more
Update #2 10th June, 2011
Added another video showing the robot doing tight pirouettes on a small kitechen scale.
Update 10th June, 2011
Added new pictures, which … Read more
Hi LMR.
I recently got into the robotics world by getting myself an Arduino and different parts.
This first project is a RC Car fitted with a Arduino board, … Read more
The wiimote is a really cool controller to use with your robots. It has many buttons, accelerometers and even a camera which tells the coordinates of the four … Read more
This is my first robot using an Atmel ATtiny2313 Microcontroller. It uses an L298N H-bridge with no PWM, with plans to add PWM. I've included schematic and code … Read more
Hi LMR,
This is my latest walking robot under construction. It's an improvement over my Lollypod robot in that it uses three servos per leg rather than two. This … Read more
This robot uses a Technological Arts Microcore11 HC11 processor, (2) Devantech SRF08 Range Finders (I2C) and a Devantech Magnetic Compass. QRB1134 based homemade … Read more
This robot is a line follower for ISTROBOT competition (www.robotika.sk/contest).
It's brain is ATmega16 AVR connectable to the PC via Bluetooth - this allows to … Read more
BlueBot is a simple tracked robot controllable and programmable via Bluetooth (Bluetooth module OEMSPA310). Chasis based on Tamiya Track and Wheel Set is bought in … Read more
Ok after a loooong time not being active on this page I figured that I had to post another NXT robot.
Ok, this is my first robot with a differential, so don't … Read more
Still a work in progress. I'm just testing out the various subsystems (wireless, camera pan & tilt, tracks, IR distance sensor). I've attached some pictures of … Read more
YAABR is my first Arduino based robot. The name is an abbreviation for yet another Arduino based robot. It is a multipurpose platform for experimentation. With its … Read more
Very simple robot plays xylophone using one LEGO® Mindstorms NXT servo motor to move forwards and the other one to lower and lift the bat. As every NXT robot has … Read more
This quite simple robot made with LEGO® Mindstorms NXT set is programmed in NXT-G (LEGO's visual programming language) to Avoid Obstacles using the Ultrasonic … Read more
