This is my first robot project. I've had an interest in electronics for as long as I can remember and began playing with PICAXE about 5 years ago, but never really … Read more
This bot is from the "Arduino Robotics" book. Great book by the way, I would highly suggest it. The first three chapters is a crash course on Electronic … Read more
Hi, I would like to show you all my new robot.
I wanted to make a simple robot base, that I could extend and modify easily, so after a few failed design attempts, … Read more
Hello LMR! This is my first ever Arduino bot. Although it's not a SHR, it's something good to start with! I cant make a SHR currently due to the "faultyness" of my … Read more
Years ago I bought a Boebot to see what they were all about. While its a good "newb" robot, it wasn't what i was looking for. So I got the idea to make it into a … Read more
This robot was made for the Search and Rescue challange by Ro-Bot-X.
It is a simple wall follower that uses an ultrasonic sensor for decting the wall and a SHARP IR … Read more
This was my first build and I consider it an on going project. I built the frame work and drive line about a year ago. Due to lack of budget it sat until about … Read more
Here's another project that I have, it was a physics project for school but I thought I could put an Arduino somewhere in there and make it more interesting, and it … Read more
During my week of final exams I had almost nothing to do after my half-days of school, then I had a revelation, why don't I make a robotic arm. The fact of … Read more
This is my first autonomous 4WDBOT on a DfRobot Base.I try to keep all mountings as clear and functional as possible - no decoration parts.
Update:
After some … Read more
Hi,
I started with a clone from OddBots Chopsticks spider robot.
I have used 8x12Kg servos and 16x6,2Kg Servos from TowerPro Servos
I also buyed the spider … Read more
Four wheel drive vehicles have always excited my imagination, and this time I joined two Farrusco (Dagu's) chassis in front to front as you can see in the … Read more
Have you ever written a simple Arduino application that just needed a single button? Most Arduino's and their clones have a reset button. Depending on your … Read more
This is Flippy, he was built to win the Cross the gap challenge but I couldn't complete him in time. He is the second (and third) implementation of my third design … Read more
I have seen a number of fantastic Hexapod style robots, most using laser cut parts and very expensive servos. Chopsticks is a robot Spider made from cheap standard … Read more
This tip/walkthrough will work with all Arduino Mega PCBs and their clones. I have found the instructions for the servo command to be a little vague so in this tip … Read more
This is a very simple quad bot I built to demonstrate to students how easily you can built a walking robot. DAGU is planning to hold a class on robotics for young … Read more
1/18/2011 - I still haven't decided what color to paint it, hence the Pink or Black in the title, but it's almost operational. I've got the line sensors, … Read more
This is the fully functional test chassis for my Arduino based sumo robot. It will be competing in March, 2011. For the prototype I am using a piece of plywood to … Read more
Hey guys I recently found all my documentation for an old line follower we had to do for a first year course at my university. We did these in teams of 4. I built … Read more
The first arduino robot I made.
It's simple, he runs around and detects obstacles and walls, changing the side that he runs.
I spent around 60 hours to build this, … Read more
In 2008 I have built a simple balancing robot, mostly a copy from a balancing robot made using a Basic Stamp 2 SX, found on the Parallax Forum, that I have adapted … Read more
AATV stands for, Autonomous All Terrain Vehicle.
Fully custom metal chassis, and "tank" like tracks.
Electronics go inside old modem case.
Motors and drive system … Read more
This is my first robot(arduino based). It is currently incomplete.
I started by getting some standard hitech servos, and then modifying them by removing both the … Read more
inspired by Guilherme Martins G-remote , i decided to take the thing to the next level and create this , still needs programming but should go along easily :) i got … Read more
