Let's Make Robots!

Arduino C

Navigate around via ultrasound and infrared sensors
Using a
Hey guys! Here its me again with another "not so smart" project. As my second robot, I chose to build an obstacle avoider with an arduino duemilanove and the … Read more
Vacuums the floors, navigates through the room with an optimized algorithm. Pays attention to edges and corners to clean well.
Using a
Hey guys, its me again. This is the third project I submit here. Vacuuminator is a (obviously) vacuum cleaning robot. It is quite similar to a roomba. I have … Read more
Plays a game with you through an xylophone
Using a
Hi there LMR, here is another one of our projects, as promised. :) This is Xylomatron. It is a robot that you can play a game similar to "Simon Says" but with a … Read more
hovers around noisily at my command!
Using a
NO-PANTS STEVE formerly know as STEVE II and even before that it was known by its true (but as it seems tongue-twister of a) name SRCMPIBDUSBNRTBAPOJTTBASOH (-- Read more
Can solve maze via ultrasound,Can grab object via ultrasound
Using a
Forgive my poor english.. Many thanks to LMR and special thanks to   BIRDMUN , ANTONIO.CACIUC,BASILE and   peter ROBOTFREAK This is my first robot that is capable … Read more
can pick up objects when held in front of him
Using a
This is one of my first robots that use servos I built this robot for my year 12 school project it isnt done yet i intend to put legs onto it annd make it walk … Read more
Seeks light to charge batteries (photovore) and avoids obstacles
Using a
If you're a FaceBooker, please visit Fiji Water's page (http://www.facebook.com/fijiwater) and "like" Fijibot! It was posted July 11th. Fijibot is an autonomous, … Read more
Put simply it avoids walls
Using a
  This is my first arduino robot which was made by help with many people on LMR and its my first robot which is not copied and by copied i mean it was not made by … Read more
Having one of those days where your too lazy to do anything? Have a robot doodle for you while you sit back in your favorite chair. This is a very simple drawing … Read more
Roam randomly navigating around obstacles by using ultrasound
Using a
YA2WDNSOSBBALABMHAMF (Yet Another 2WD Not So Original Starter Bot But At Least Assembled By My Own Hands As My First) or just B4short, --- a tale of many horrors, … Read more
Interacts with human beings
Using a
***Update 17/05/2012*** Fubo assembled and partly wired … Read more
Obstacle avoidance, education
Using a
I built this super basic robot as a start-here style bot for a presentation I'm doing in a few weeks. I wanted something I could demonstrate building in realtime … Read more
4 legged, can be remote controlled or autonomous
Ok. This is an upgrade(control) for my 8 servo 4 legged walker... now its using an arduino328 clone. Currently, its still remote controlled via hacked cheap R/C car … Read more
drives around guided by IRremote
Using a
My first robot! Built from an Arduino UNO, some Lego I had lying around, and a couple of 9g servos... The IR and remote have been scavenged from a remote controlled … Read more
This is my first robot project. I've had an interest in electronics for as long as I can remember and began playing with PICAXE about 5 years ago, but never really … Read more
Supposed to follow an electrical tape line.
Using a
This bot is from the "Arduino Robotics" book.  Great book by the way, I would highly suggest it.  The first three chapters is a crash course on Electronic … Read more
line follow, avoid obstacles, lots of things in the near future
Using a
Hi, I would like to show you all my new robot. I wanted to make a simple robot base, that I could extend and modify easily, so after a few failed design attempts, … Read more
Years ago I bought a Boebot to see what they were all about. While its a good "newb" robot, it wasn't what i was looking for. So I got the idea to make it into a … Read more
This robot was made for the Search and Rescue challange by Ro-Bot-X. It is a simple wall follower that uses an ultrasonic sensor for decting the wall and a SHARP IR … Read more
Obsticle avoidance via a Ping UltraSonic sensor
Using a
This was my first build and I consider it an on going project. I built the frame work and drive line about a year ago. Due to lack of budget it sat until about … Read more
This robotic hand can be controlled by a sensor-glove or a graphic program.
Using a
In first, sorry for my english, Im a french teenage boy of 16 years and as many french, am not very good in english.   Read more
It goes around just like an RC car but it's much more fun because it's floating.
Using a
Here's another project that I have, it was a physics project for school but I thought I could put an Arduino somewhere in there and make it more interesting, and it … Read more
     During my week of final exams I had almost nothing to do after my half-days of school, then I had a revelation, why don't I make a robotic arm. The fact of … Read more
Ultrasound navigation, reacts on nearfield bodyheat, detects light
Using a
This is my first autonomous 4WDBOT on a DfRobot Base.I try to keep all mountings as clear and functional as possible - no decoration parts. Update: After some … Read more
Hi, I started with a clone from OddBots Chopsticks spider robot. I have used 8x12Kg servos and 16x6,2Kg Servos from TowerPro Servos I also buyed the spider … Read more