While working on my first robot I ran into this problem. So I decided to make a quick second one just to keep me in the flow with all that new robotic-topics to … Read more
Well this is my first partial success building robots, my symet did not work :P and I am still trying to figure out what is wrong with it:P I got the book from … Read more
My first moving robot. It's an arduino based bot that uses two continuous servos, adafruit motor shield, and Sharp IR. The wheels were scavenged off of a toy car … Read more
Hello! This is my second, quick maded robot. I got parts from old toys and matchbox (;D)
It's a vibrobot using 9v, big power for small motor.
It has some kind of … Read more
MICBot2 is an autonomous robot for obstacles detection and deviance and goes around, it works indoor or outdoor.
Therefore, this solution uses the ultrasonic sensor … Read more
Spurt is a brainless line following Beambot. It is based on the Spurt-Mobil from the University of Rostock / Tech. University of Berlin. It is a very cheap robot … Read more
Well, this is my first robot in approximately 15 years and damn but things have changed! Put it this way, the last book on robotics I read was 'The Robot Builder's … Read more
*** Update April 17, 2011 ***
Speak2Me is able to water a flower just controlled by spoken comments (see first video)!
*** Update April 16, 2011 ***
Read more
2011.2.23
Thought about how the robot should get rid of the parachute after landing without a complicate mechanism and came up with this solution:
Quite simple: A … Read more
So I'm new to LMR, and this is my first robot. For now, it's just an Arduino Uno, a motor driver circuit, and two motors. The motor driver circuit I got from here: … Read more
I thought it was one of the rule to join the great community, so I spend this weekend to make this "Start Here" robot by using Arduino with motor shield from … Read more
In my thesis I am creating a development board for use in the University Labs. This same idea is put here, to develop a mini-version, for purposes of … Read more
Hi guys,
I´m new here (nine years old), and this is my second robot of the site but my first robot on my page. My first robot is on site of my father (Aruniosmo). … Read more
Not sure if it clasified as a robot, either way, its simple!
i know the arduino is overkill, soon it will be an attiny13 instead.
tripod was free, chocolate box … Read more
This is a test platform for me entering to robotics.
at the moment there is only tracked chassis,gear-box twin motors,arduino,breadboard . soon I add the GP2D120 … Read more
I stole/scavenge my son rc car attached the remote to the pc parallel port with a pnp transistor,I put an IP-CAM on it ,and controlled the all thing with a C# … Read more
Description:
September 16, 2009:
This is a small platform I'm designing to test different control algorithms for my undergrad thesis. It's simple so far, … Read more
Another Junkbot, this time from a dead PS2 mouse. Knocked out in a couple hours from parts that were already on hand. Its main purpose in life is to entertain my … Read more
I need to finish some things, then i will put the complete project on web. I still have some technical and electrical problems which i am figuring out. Programming … Read more
I've started on my own version of the Herbie-stlye mousebot. They are so simple and fun, I couldn't resist.
So far I have the basic circuit breadboarded and … Read more
This is my version of the breadboard walkthrough by Jklug80. Thanks for the intructions jklug. Anyway, I decided to add two more LED's and I used 510ohm resistors … Read more
