Let's Make Robots!

ATtiny 85 Arduino

My PCB Adventures...

Inspired by Birdmun's adventures in PCB's I decided to try my hand at it. I'm no guru, in fact I'm pretty noobish to this whole thing but I thought I'd share some of the things I've worked out with the help of friendly LMR'ers.

All the equipment I'm using is standard stuff that some folks may already have around:

1. Laser Printer. I had an inkjet which will work using a different method that employs special boards made for UV etching but I             picked up a Brother HL-2240 for $60. It was the cheapest no-frills LP I could find.