20/11/11
This is my new autonomous line following bot starting to take shape and a much more slicker design than my last bot attempt.
It's made out of clear … Read more
I figured I should start with the chassis on this project:)Built around an old computer drive on which I attached a pair of gearmotors (12v,200rpm).The 12v battery … Read more
This is my first robot: robby and RP6 robot. It is based on a ATMega32 controller which is programmed in C. It's an highly extensible platform build from high … Read more
Meet Head, the big headed robot. Head's life is really simple being just joy and play. Well, for now at least. That may change in (near) future if I manage to get … Read more
News (for those who don't want to read the article)
-I have got one of the line sensors working.
-I have got some basic line following going
-I have given up on … Read more
You can buy German Cheese in Shanghai, sealed in a nice aluminum can. Since a while I toyed already with the idea of doing sth. with these cans. Too good to throw … Read more
KRB1A - Katebot from now on will be refered to as Katebot in thos page.
About KateBot:
KateBot is my first robot that i planned to build and have started to build … Read more
Hi guys,
I would like to introduce you the first robot of my son (Michael). He is nine years old and he often helps me with my robots. This is very simple robot. … Read more
The scooter bot has both tele operated and autonomous modes. It's fast; top speed around 12 MPH. Current autonomous mode is limited to navigating a space using front and rear IR sensors and wheel encoders. Using a
This was a fun robot to build. It's our 4th. It's the most agile one we've built so far. The 2 wheels mounted on the center access provides … Read more
I was hoping to finish this robot in time for the Mr Basic DAGU II competition, but I doubt I will have it done in the next 24 hours. Here is what I have so far!
Read more
It has a funky name because I like funky names. Otherwise, it's ultimately just a box, with four cpu fans to create suction, and move around and bump into … Read more
Ok,
It came to the piont Mr. Wake got some shape, so I'm posting it here. Wake is Mr. Basic V2.0 contest entry, and he is intelligent annoyeing alarm clock bot :D. … Read more
Tesla will be a multifunctional robot that will have priority tasks. Unlike other robots that will just "do" things, this robot will have tasks only if certain … Read more
Well I have finally started my first bot for this site.
This is basically a re-build of a robot I made around a year ago, using the Picaxe School experimentor … Read more
As my first microcontroller robot, I have made a two-wheeled robot with bumper switches and edge-detction (because I have death-causing cliffs in my house). The … Read more
Hi guys !
I'm working on a robot from plywood. He should the stairs up and down ride.
He receives four strong (12kg/cm) servos modiefied for continuos rotation and … Read more
Update 3/27: Per request, I've attached the code I used for this guy.
--------------------------------
This is my next little object-avoider, made from spare parts … Read more
1-1-09
Roger has been working like this for a while, but I never went around to make a video of it. Here it is. I added some white LED's as head lamps and that is … Read more
The Robotwo is inspired by fritsl "how to make your first robot".
My goal is to let the robot drive around my living room without any human interfering.
However … Read more
Update - added a front bumper switch
The switch is activated by a horizontal bar, and currently only triggers the camera to take a photo.
Description
This is a … Read more
This is the start of "Plank." My first successful attempt at a robot.
The base is made from a 3mm thick 4x12 inch piece of plywood. Wheels are model airplane … Read more
