Let's Make Robots!

autonomous

This is my second puppy robot and the first to use a QuadBot kit. The robot is quite simple, just a pan / tilt kit mounted on a QuadBot chassis with DAGU's new … Read more
this is my first robot, it isn't that complacated. two switches, a on off and on switch some wires bateries and thats all. the switch on top is the on off and on … Read more
Navigate around via ultrasound, robot autonomous obstacles detection and avoidance
Using a
MICBot2 is an autonomous robot for obstacles detection and deviance and goes around, it works indoor or outdoor. Therefore, this solution uses the ultrasonic sensor … Read more
Autonomous Robot Obstacle Deviance via ultrasound
Using a
MICBot is an autonomous robot for obstacles detection and deviance and goes around, it works indoor or outdoor. Therefore, this solution uses the ultrasonic sensor … Read more
Obsticle avoidance via a Ping UltraSonic sensor
Using a
This was my first build and I consider it an on going project. I built the frame work and drive line about a year ago. Due to lack of budget it sat until about … Read more
hello everyone im in the middle of making a robot which uses an arduino and an ultra sonic sensor (clone of ping so it has the same pinouts) ive got the robot and i … Read more
Navigates around using the Ping sensor
Using a
Someone mentioned that Jameco needed a robotic mascot. I have always been a tinkerer, especially with radio-controlled electronics and so I volunteered for the … Read more
  The name of this tiny robot is Atom. Atom is a micro sumo robot. Its dimensions are 5 cm x 5cm x 5 cm It has a CNY70 sensor to detect the white path and an IR … Read more
This is my first experience in legged robots. By making this quadpod robot I wanted to learn how to implement different gaits using servos. I used the same PCB … Read more
Navigates with a PING))) currently. Used for experimenting with Propeller on a robotic platform
Using a
The PREP - Bot is my first robot using a Propeller Microcontroller, and my first robot post on LMR. P.R.E.P. stands for Propeller Robotic Experiment Platform. … Read more
This is my attempt to build a very small and light but offroad vehicle. The accelerometer acts as a tilt sensor. A bandwidth of 1Hz has been set with according … Read more
hopefully navigate around via ultra sound
Using a
well ive got this robot all built and wired up but ive got a few problems with it. for starters the servo is completely stuck i just got the metal gear servo and … Read more
UPDATE : I've made some changes. It's smaller but for a dumb mistake now it's unstable, working on that! For the Motor Controller I'm using a L293D with a … Read more
avoids obstacles using a sharp ir sensor
Using a
After reading on LMR for a while and drawing inspiration and reading about loads of tips and tricks i thought i should share my first creation. It is not finished … Read more
Walks forward, backward, spins, blinks.
8/5/11 Update: Everyone should build one of these.  This was my first 'remove the PICAXE' of the dev board project.  Good fun! Read more
Drives around bumping into objects making the room smell great
Using a
I just finished my very first robot today. Not having a Ping ultrasonic sensor I searched my parts box for ideas on how to avoid objects. After having realized that … Read more
Navigate around and separated 3 kind of recycled material.
Using a
his project is a graduation conclusion project, consist robot that navegate around and identify objects ( the objects can be bottle glass, aluminum and plastic ) … Read more
Walks around and avoid obstacles
Using a
So here's my first robot. It's based on Insect robot from MAKE : Arduino Bots and Gadgets. I've used Arduino Nano. For now I'm still improving walking of the robot. … Read more
Drives around using feedback from the Sharp IR sensor to avoid objects
Using a
Well...this is my first attempt at building a robot. Right now it does basic object avoidance and drives around...woohoo! I'm going to continue to tweak the code … Read more
Hi, This robot is a six wheeled explorer robot. It has 4 solar panels two of them are 6 V 500 mA and the others 6V 250 mA. In addition to autonomous operation, it … Read more
Izci is a line follower robot with one CNY70 sensor. The sensor was adapted on a servo motor so it can be moved according to the white path. İzci was controlled … Read more
Last Update: 3-Aug-2011 : Finished assembly. Updated board photos and added few more. Meet IBS-Wormy! This is a simple bot for my baby-daughter to play with. And I … Read more
Hi guys! this is my first robot project and it's a simple "light-seeker". i used an arduino uno board and a motor shield from adafruit. the base is done with pieces … Read more
  Hi all, Behold my new little toy, the CRAB. This is my attempt at creating a 4WD rover like bot, the main target here beeing making use of the little motors I … Read more
Yet another walking robot but starting from scratch.
Using a
Update August 16, 2011 The PCB boards arrived a day earlier than expected (ordered on a Friday, arrived the following Friday). Eleven brain boards and 66 leg … Read more