Let's Make Robots!


    I introduce you to the RocketBot Family of Robots. Read more
Years ago I bought a Boebot to see what they were all about. While its a good "newb" robot, it wasn't what i was looking for. So I got the idea to make it into a … Read more
pops a severed head out of the top and plays a strobe and a spoooooky laugh
Using a
ok, so my wife wanted a scary halloween prop for "halloween town" and i had a picaxe 28x laying around. so i figured id try building something that popped out of … Read more
My newest bot. I hadn't had time to build one recently, so I MADE time. Heh. Not too much to say about the little guy. I scavenged the tracks/base off of a toy … Read more
Roming around using an SRF-04 for obsticle aviodance
Using a
This was built about 7 years ago, the idea for the chassis came from the BOE-BOT, the controller is an Out of production Stampbug 2 board, from Milford Instruments … Read more
turn L & R looking for target, then full speed attack until it detects white line on edge of ring then it backs up and turns round.
Using a
This was my first attempt at a sumo robot, built about 8 years ago, it used 2 servos for propulsion, and had a Basic Stamp 1 to control it, it had photo cells … Read more
Its a sumo bot, line follower, and object avoidance, all in one little package.
Using a
   This robot is a rebuild of my Start Here Robot.  One day I was looking for things to do(other than clean my work bench) and saw my my SHR sitting there and … Read more
Navigate around with IR sensor
Using a
R.A.V. ( Red Avoiding Vehicle) LOG: // 10/2/11 : LMR RAV and servocentercode files added Read more
Navigate via IR rangefinder and tactile feelers, look nifty
Using a
UPDATED: OCT. 31, '11: Checked complete box \o/ Added a couple of hidden vids of Hexy disturbing people at work. Read more
this is my first robot, it isn't that complacated. two switches, a on off and on switch some wires bateries and thats all. the switch on top is the on off and on … Read more
Navigate around via ultrasound, robot autonomous obstacles detection and avoidance
Using a
MICBot2 is an autonomous robot for obstacles detection and deviance and goes around, it works indoor or outdoor. Therefore, this solution uses the ultrasonic sensor … Read more
Autonomous Robot Obstacle Deviance via ultrasound
Using a
MICBot is an autonomous robot for obstacles detection and deviance and goes around, it works indoor or outdoor. Therefore, this solution uses the ultrasonic sensor … Read more
Obsticle avoidance via a Ping UltraSonic sensor
Using a
This was my first build and I consider it an on going project. I built the frame work and drive line about a year ago. Due to lack of budget it sat until about … Read more
hello everyone im in the middle of making a robot which uses an arduino and an ultra sonic sensor (clone of ping so it has the same pinouts) ive got the robot and i … Read more
Navigates around using the Ping sensor
Using a
Someone mentioned that Jameco needed a robotic mascot. I have always been a tinkerer, especially with radio-controlled electronics and so I volunteered for the … Read more
  The name of this tiny robot is Atom. Atom is a micro sumo robot. Its dimensions are 5 cm x 5cm x 5 cm It has a CNY70 sensor to detect the white path and an IR … Read more
This is my first experience in legged robots. By making this quadpod robot I wanted to learn how to implement different gaits using servos. I used the same PCB … Read more
Navigates with a PING))) currently. Used for experimenting with Propeller on a robotic platform
Using a
The PREP - Bot is my first robot using a Propeller Microcontroller, and my first robot post on LMR. P.R.E.P. stands for Propeller Robotic Experiment Platform. … Read more
This is my attempt to build a very small and light but offroad vehicle. The accelerometer acts as a tilt sensor. A bandwidth of 1Hz has been set with according … Read more
hopefully navigate around via ultra sound
Using a
well ive got this robot all built and wired up but ive got a few problems with it. for starters the servo is completely stuck i just got the metal gear servo and … Read more
UPDATE : I've made some changes. It's smaller but for a dumb mistake now it's unstable, working on that! For the Motor Controller I'm using a L293D with a … Read more
avoids obstacles using a sharp ir sensor
Using a
After reading on LMR for a while and drawing inspiration and reading about loads of tips and tricks i thought i should share my first creation. It is not finished … Read more
Drives around bumping into objects making the room smell great
Using a
I just finished my very first robot today. Not having a Ping ultrasonic sensor I searched my parts box for ideas on how to avoid objects. After having realized that … Read more
Navigate around and separated 3 kind of recycled material.
Using a
his project is a graduation conclusion project, consist robot that navegate around and identify objects ( the objects can be bottle glass, aluminum and plastic ) … Read more