Let's Make Robots!

6V

It's been a while since I had time to post anything here. This is my first outdoor type robot. I have the R/C mode testing almost done. The gripper should work … Read more
Robotic Arm (R.A.1) This is a robotic arm with 4 degrees of freedom. Arm made from aluminum and galvanized iron which i cut and pierced in C.N.C pantograph machine. … Read more
Wishes Merry Christmas by waiving hands to passers by
Using a
Hi! And Merry Christmas and Happy New Year to everyone! Here is my Christmas theme bot, the SnowMan SnowBot! :D This is the first brand new robot to come out of my … Read more
Solve's a maze and remembers the quickest route.
Using a
aMaze is A Maze solving robot. Custom build using an Arduino bootloaded atmeag328p as the brain, a SN754410 as Motor Control, all wired on a solderless breadboard … Read more
This is my latest robot, BFR-H1. It is a humanoid robot torso actuated with servos with potentiometers for feedback on each joint position. It's similar in design … Read more
this is a low cost vore,in progress.the base include:2 gearmotor driver(wheel dim=80mm),4 edge senser base,1dof head(ping senser attached).check the attachment … Read more
Line-following robots with pick-and-placement capabilities are commonly used in manufacturing plants. These move on a specified path to pick the components from specified locations and place them on desired locations.
Using a
Line-following robots with pick-and-placement capabilities Read more
robotic microhandler controlled by arduino and processing
Using a
Hi all, I wish to share with you my last robot: the robotic microhandler. It is controlled by processing GUI created with GUI builder of G4P library . In the GUI … Read more
Last Update: 3-Aug-2011 : Finished assembly. Updated board photos and added few more. Meet IBS-Wormy! This is a simple bot for my baby-daughter to play with. And I … Read more
Navigates my kitchen floor
Using a
My second robot. Some secondhand plexi (note holes here and there) and some sort of pipe-mount-thing I found laying around that worked perfect for mounting the … Read more

FAB

This is my first arduino robot. FAB : First Arduino Bot I used roboshield for this project which i bought for Rs 400 ( $9 approx.). i have attached the code.The … Read more
I wanted to make a small Arduino robot using an original Duemilanove and the Robot Builder's Shield. But I also wanted to have a chassis plate so I can mount the … Read more
So after lots of hard-work, frustation, time, spending money on wrong parts; I built a robot. Its a Photovore based on NPN transistors. when its LDRs are pointed … Read more
Update - 23/02/11 The hardware for elroy is almost complete, only the stretch sensors for the head to make and mount.  I can now control the elbow, shoulder and … Read more
Grabbing objects, swinging them around
Using a
This is a delta parallel robot - aimed to be the smallest in the world. I aimed at a height of about 1cm, but during building I found that, with my … Read more
Hallo Guys!!! Because my Remot Control of "Fishing robo(A)t" is broken, have I a little time for next robots. I wanted always to build a Line Follower robot. This … Read more
I decided to build a pan/tilt mount using the DAGU parts I recently received. I did have a little trouble, but overall I'm pleased with the result.  You may notice … Read more
A simple Wall-E robot I converted from a toy that had a tethered remote control. Doesn't do anything fancy but is cute. I wanted to do it as a challenge to see if I … Read more
Hi guys ! I'm working on a robot from plywood. He should the stairs up and down ride. He receives four strong (12kg/cm) servos modiefied for continuos rotation and … Read more
I know some won't consider this a "robot" because it lacks a brain, but it is still fun and worth mentioning. Anyone who is familiar with Cub Scouts, Boy Scouts, or … Read more
Since I started messing with robotics that I wanted to build a tank, and finally that moment arrived when two Tamiya thread kits and a Twin Motor Gearbox arrived. … Read more
I have got the sonar sensor working and scanning and added this to the data sent to the pc.  I have also written a very basic obstacle avoidance program which … Read more
test bed for GM motors - currently sonar / avoidance
Using a
Well, I got busy tonight and designed a chassis for the GM series of motors. The GM motors are really tops with price/performance... at $5.50 each, they are VERY … Read more
well, it's my first manipulator. ist's nothing special, but it's better than everything i did with this metal contruction box i have. it would be great, when there … Read more
Hi Everyone, great site. Just created an account so i thought i'd share my robot with you. I originally designed this robot as a micromouse and i got it to … Read more
Drives around and finds something to drum on, while avoiding walls.
Using a
After seeing so many great drumming robots on LMR, I figured it was time for me to build one of my very own. I have never built a robot, or done anything quite … Read more
Walks in variable directions, controlled from a computer.
Using a
Yes, this is a teaser... I will post more content of it and a tutorial as well. *Update* What i've been working on lately is to shorten down the legs. I tested it … Read more