Let's Make Robots!

3 servos

It's been a while since I had time to post anything here. This is my first outdoor type robot. I have the R/C mode testing almost done. The gripper should work … Read more
Move objects
Using a
This is my bachelor thesis. Delta robot will pick up objects and paletize them using machine vision. Servos are controlled by FPGA, that is controlled by … Read more
Remote Controlled Robot, Navigate around via ultrasound
Using a
After some weeks of browsing this website, I felt inspired to built something, so, here is the first robot that I'm currently working on. The idea of this project … Read more
Navigates around the room detecting obstacles and avoiding them.
Using a
UPDATE: Project scraped, would need ball berings for this to work correctly since the aluminium is rubbing against each other and making bigger holes and the robot … Read more
Goes forward and avoids obstacles
Using a
After some time of non-activity I built something realy tiny. Ut is made from home stock parts. Bug simply goes forward. When meeting an obstacle it goes 5 steps … Read more
Object Avoidance Robot
Using a
Hello, finally I have finished my first robot, I named it "TurtleDuino"  (you'll see why?).     Read more
  Hello I have been scrounging junk again!  -lol   I'm still working on my Jansen walker project, but found this mechanical thingy (junk) at my job and was told … Read more
Avoid objects, move around random, make someone smile
I was in Amsterdam for New years eve and ended up buying myself a coffee cup that came in a cool box. After I got home I put away my new cup and then thought about … Read more
For the sake of it, I wanted to see if I could make a really simple biped - and this is what I came up with :) I thought it was really fun to do, much more than … Read more
Autonomous Robot Obstacle Deviance via ultrasound
Using a
MICBot is an autonomous robot for obstacles detection and deviance and goes around, it works indoor or outdoor. Therefore, this solution uses the ultrasonic sensor … Read more
Navigates with a PING))) currently. Used for experimenting with Propeller on a robotic platform
Using a
The PREP - Bot is my first robot using a Propeller Microcontroller, and my first robot post on LMR. P.R.E.P. stands for Propeller Robotic Experiment Platform. … Read more
Walks forward, backward, spins, blinks.
8/5/11 Update: Everyone should build one of these.  This was my first 'remove the PICAXE' of the dev board project.  Good fun! Read more
Here we have Boxxy, my SHR. I had originally intended to give it a nice plexi-glass chassis; however, I chose instead to use an old cellphone box. There's something … Read more
Last Update: 3-Aug-2011 : Finished assembly. Updated board photos and added few more. Meet IBS-Wormy! This is a simple bot for my baby-daughter to play with. And I … Read more
To start, I'd like to say this is my first robot, but, since I had electronic- experience, and so many people have done the SHR, and I had a good idea, B.I.L. was … Read more
This robot was made by 2 pieces of foam-core stuck together to make the chassis. I used the same circuit board as in Start Here. It isnt that nice. Its only my … Read more
Yesterday I finetuned the code for ladybug independent moves. I excluded the IR TV remote controll functionality because infrain function on 08M is somehow … Read more

TRI

This is TRI, my newest project. 3angle, 3 continous rotating servos, 3 normal servos, 3 Sharp IR, 3 solar cells... 3 home made servo joints: 3 continous rotating … Read more
This Delta Robot is made from ply wood and aluminium. Cheap servo motors for the positioning. Atmel Attiny2313 for controlling the servos over RS232 with MATLAB. … Read more
 ShC v1 (Simple hexapod Clone version 1)   Description. This small hexbot its based in the simple three-servo hexapod robot using the Pololu Micro Maestro. This … Read more
Avoiding objects and walls
Using a
This is my second robot, it is the same basic "cutting board" robot but now using the Sharp GP2Y0A02YK0F to avoid objects and walls. The code have comments and … Read more
I thought it was time to do something with legs. While roaming the store I found jumbo wooden sticks and for some twisted reason I thought I should use them to … Read more
Walks, avoids obstacles
Using a
This was the first robot I ever built.  Its based on the design in the book Insectronics by Karl Williams.  The body is made from aluminium and it uses 3 servos … Read more