I got inspired by Frits walking dead duck video, I like a lot, so I decided to build one like his. It's not really the same since I don't like to use wood as a … Read more
Ok...this is my first ever actual project in electronics, programming and mechanical engineering and i decided to make life difficult from the start by making the … Read more
20:45 GMT, 2nd May 2012:
Hello everyone! Today I got my first package, containing everything I need for my PICAXE (including the actual PICAXE board) and a servo. I … Read more
A few months ago I stumbled upon a couple of plastic spheres sizes 16cm and 4cm in diameter. The spheres came in separate halves, making them ideal for a small … Read more
I had a Picaxe28 board lying around that i hadn't used and had been wanting to do something similar to the LMR start here bot for awhile now because it seemed to be … Read more
This was my first robot. It had been awhile since I did anything with electronics, so I had quite a bit of refreshers needed on soldering, etc... I modeled this … Read more
This is my second version of my ERV-1 robot.
Update : 27-2-2012
Picaxe 28x1 Project-board mounted above the motors.
Home-made Power supply board, with one … Read more
This is my ongoing project to creating a simple household pet. I wrote i short blog about the concept, but now that parts are trickling in I feel I can write a … Read more
this is my funny walker made out of balsa, it tracks objects with two sonic sensors and has two settings, with one setting it will just sit and track with its head … Read more
Got this as a kit however it suffered a bit in the mail, bought the picaxe chip seperate and had to repair a few of the traces going to the right rear corner. … Read more
This is humphrey the tempremental robot.
he is my variation of the start here robot (why do i refere to it as he) basicly the sme but with tracks and an ausome … Read more
This robot is a rebuild of my Start Here Robot. One day I was looking for things to do(other than clean my work bench) and saw my my SHR sitting there and … Read more
This is my robot B.E.A.T.S. It is a YDM clone.
B.E.A.T.S. stands for, Bot Entertaining Autonomously Through Sound.
It took me about a month (off and on) to build … Read more
This is my attempt to build a very small and light but offroad vehicle. The accelerometer acts as a tilt sensor. A bandwidth of 1Hz has been set with according … Read more
One day when I accidentally browsed NET settlement, I came across a video in which found a robot with tank chassis, which used to measure the distance ultrasonic … Read more
This is my first robot...a simple SHR. I connected a 7 segments LED mounted on a small breadboard. the LED display "G" when its going forward and "S" when it stops … Read more
To start, I'd like to say this is my first robot, but, since I had electronic- experience, and so many people have done the SHR, and I had a good idea, B.I.L. was … Read more
This is Robie, a "Start Here" robot my 7 year-old daughter (D1) and I built while away on vacation. We used the LMR kit from Solarbotics, a cheap soldering … Read more
Hi guys, i've been reading about all of your amazing robots for months now so I thought it must be time to post something of my own. So here it is "Norm" I … Read more
This is my first Robot and it gve me a great start. Thanks fritsl for giving such a start. Its quite Easy, but living in India, I faced some Problems. The first … Read more
this is the very begining of my quadruped it uses a picaxe 28x1 and will sponser up to two servos per leg (2dof) so far the black box is just the "control station" … Read more
Hello LMR, First of all, this little guy is made just for testing purposes and to prove that my concept works. There are no revolutionary solutions in this little … Read more
This robot was built for my google science fair entry. The goal behind this project was to see if an inexpensive robot could trigger anti personnel mines. … Read more
I had this idea after I studied a tulip on my roof garden. In the morning the blossom opened, in the evening the blossom closed. If I forgot to water it, it let its … Read more
Well here is my start here bot. I want to do more with it eventually but I am moving on to the Aduino platform for my next bot that I need to design. The start here … Read more
Construction of the arm
The arm is made from 2mm ABS sheet. This material is very easy to cut with a carpet knife, can be very well glued with superglue and be … Read more
My "start here" attempt(and also sorry me for my language) with some kind of manual design and some additional things like indication of state on/off photodiode , … Read more
