Let's Make Robots!

photovore

THIS PROJECT IS CLOSED AND PARTS IN MY BOXES Problem solved: Okay so my problem was that motors didn't get enough power. I tested this with 6v and it … Read more
Photovore - Light seeking solar powered
  Introducing Medibot2, this is infact the same bot that I introduced a fews years back as MeditBOt1.Back then he was housed in an empty pill bottle. Now after a … Read more
Simple object/light avoidance, and line follower.
Using a
  UPDATE 19/11/2010 As promised, I've added a short video of some of the functions I can use RDP-01 for. I know they're not brilliant, but at least I am beginning … Read more
Simple light following Photovore
Using a
This is my first attempt at building a robot. A very simple Photovore. As we don't get much sun in our house, I had to use a torch to make the video. This is all … Read more

Is this a nice name?

networkzombie's picture

Is Trace-E a good name for my first robot?

So after lots of hard-work, frustation, time, spending money on wrong parts; I built a robot. Its a Photovore based on NPN transistors. when its LDRs are pointed … Read more
Vibrate around phototropically with tactile feelers
UPDATE: ADDED VID WITH NEW EYES AND SOME THOUGHTS AT THE BOTTOM. One of my lower priority robots but thought I'd post it up for scrutiny anyhow. My plan is to use … Read more
JAX's picture

My first robot..........

networkzombie's picture

So I've decided to build my first robot which not the LMR "start here" one (that one is going to be my second one) and im using this circuit- http://costaricabeam.solarbotics.net/Circuits/Vores/555%20Photovore.png . I've tried about 10 different designs for the body but its just not working. When i cover the left photocell with my hand and the other one is exposed to light the speed of the motors is the same and same with the right photocell. has anyone tried the circuit? did it work?

Lightseeker/photovore
Using a
This is my second functioning robot. All the parts are recycled, so it didn't cost me more than a bit of time. The schematics can be found all over the internet, … Read more
Stays "alive" by navigating towards bright light sources
Updated 28/10/2009 Added a video of the bot in motion. Description This is my first vibrobot. I've wanted to create a phototropic BEAM vibrobot for a long time … Read more

Run away robot

I don't have a enough skill to do it, yet, but it would be cool for one of you to make a robot that runs away and hides.  I was thinking you could make it go to the darkest part of the room and wait until it hears sound coming to it (with several mics pointing in each direction) and run away from it.  Or just one that hears and runs away.