Picaxe basic

I got inspired by Frits walking dead duck video, I like a lot, so I decided to build one like his. It's not really the same since I don't like to use wood as a … Read more

Ok...this is my first ever actual project in electronics, programming and mechanical engineering and i decided to make life difficult from the start by making the … Read more

Hi all this is my first project here its a basic 3 servo walker, the board is a picaxe 08m2on a project board the center servo will be on bo the right servo will be … Read more

20:45 GMT, 2nd May 2012: Hello everyone! Today I got my first package, containing everything I need for my PICAXE (including the actual PICAXE board) and a servo. I … Read more

Phase 1 (Updated 29/4 - New video & code.)     Here's a little robot built on CTC's excellent Tiny Tank chassis. It's based on a Picaxe 28X2 which … Read more

UPDATE: 24MAY2012 -- I am adding yet another video of the robot on the lift, but I can announce that I have his programming about completed, and in lieu of further … Read more

  this robot is a update of franco, my last robot...(SEE URL) COMPONENT;    AXE023 with Picaxe 08m2(08m2 is more powerful of 08) SHARP GP2D15 (ir sensor analog … Read more

basically an update of my previous bot scooter. more updates to come.   some pictures: HEY!! its the new me :-) HELLO! still "no name" though.. beep beeeeep … Read more

Hello all, Read more

This is the third version of Primo. It has ultrasound sensor and bumper. I used my Aperia Arc S like webcam . Read more

http://letsmakerobots.com/node/30618 for more detail on Scooder goto the link and see The China Syndrome,"Scooder i am your father "  "NOooooooooooooooo"  lol  … Read more

This was my first robot. It had been awhile since I did anything with electronics, so I had quite a bit of refreshers needed on soldering, etc... I modeled this … Read more

This is my first attempt into making a biped walker.  I have no such background in either electronics or robotics.  Nor do i have any experience with tools or … Read more

*Complete* is not really the correct word for it.  While trying to set up the four pins with screw terminals on my high power project board, my buddy and I managed … Read more

The China Syndrome : It was a dull night on the internet , so i was searching Ebay for cheap parts and found lots of mini servos for around $4 + or - .50c ,some  … Read more

This is a very simple robot using only Picaxe-08M. I can be controlled throught computer or it can walk alone. The bateries are only weight for ballance, just to … Read more

I had to build a robot just to test a board... I wanted a nice, simple 08m board to play with so I made one! It is not too shabby, if I do say so myself and quite … Read more

Got this as a kit however it suffered a bit in the mail, bought the picaxe chip seperate and had to repair a few of the traces going to the right rear corner. … Read more

Update April 1st   Well the dust has cleared and I have finished and submitted my Google Science Fair project and I very happy with it.  I have added the site … Read more

Hi, This is second version of my robot Primo. It is Lighter, Faster, Smaller and nicer (I think :D ). It is controlled by Picaxe-08M. I used one IR sensor connected … Read more

This is humphrey the tempremental robot. he is my variation of the start here robot (why do i refere to it as he) basicly the sme but with tracks and an ausome … Read more

Read more

Hi there this is my new play thing > PicAxe 08m2 < and i was just trying to learn how the thing works , you know servo ADC ,LED, Tone , come up with a cool … Read more

Hi i'm new and this is my first robot :) COMPONENT;  AXE023 with Picaxe 08m2(08m2 is more powerful of 08) QRB1134(ir sensor photo reflector) SENSOR … Read more

I have managed to get every thing except the neck motor to play ball. it took a bit of trial and error to find the correct wiring connections as my board layout is … Read more

    Pictures in High res. now available on: https://picasaweb.google.com/117478617231202648212/Primo?authkey=Gv1sRgCLy4gIfUuZSIrwE The Code is on English now … Read more

Hello everybody !!! :) The main aim of this project is to convert a normal computer monitor into a touch screen monitor.. For this I use 2 SRF005 ultrasonic range … Read more

This is a current work in progress that is waiting for a few parts.    The goal for this project was to make a robot that could go after people with an airsoft … Read more

8/5/11 Update: Everyone should build one of these.  This was my first 'remove the PICAXE' of the dev board project.  Good fun! Read more

I got the SHR because I wanted to turn it into a cat toy. It works; just ask the cats... The CatScan Robot sits patiently waiting for one of our cats (Zena or … Read more