Hey guys. This is my first robot. Couldn't have done it without Robot Builders bonanza and letsmakerobots. Did a lot of research before I decided to buy a bs2 from … Read more
Hello all,
This is my Boe-Bot spy version using Basic Stamp 2 controlled by Desktop Software.
I used Delphi 7 IDE to create a user interface program to control … Read more
This is my first Robot ARM controlled by Basic Stamp 2 microcontroller with voice recognition "Say It Module". I used 5 Servo motors 3 large and 2 medium. Say It … Read more
This was built about 7 years ago, the idea for the chassis came from the BOE-BOT, the controller is an Out of production Stampbug 2 board, from Milford Instruments … Read more
The main goal of this project was to develop an autonomous rolling robot, based on Parallax Boe-Bot, but using two boards and microcontrollers.
It uses only … Read more
Hi Everyone Here is my Boe-Bot.
It's a fun kit from Parallax that comes with a great book and bunch of parts. I knew absolutely nothing when I started and going … Read more
Hi there !
I am a new member here.
This is my first Robotic Arm that I built myself.
Most of the parts are made out of acrylic plastic.
I use a micro servo … Read more
my first robot a suntracker using basic stamp 2 and meccano metal parts
the chrome dish focuses sun, i'm going to use it to heat water in next build
4 … Read more
I saw the moive wall-e and like him so I decided to build a wall-e style chassie. I am useing cheap wood, Two servo motor, track set from robotshop.ca, and the … Read more
this was my first robot. though it was a kit and i didnt have to create chassis myself, it taught me a lot. after finishing the book and the exercises in it i … Read more
This robot is based on the Parallax BoeBot. The chasis is flipped upside down. The tracks the Tamiya Track kit. It uses the BoeBot IR sensors and a Sharp IR … Read more
This is Mark 3
He will never be complete, as he is a simple test platform I use for testing new code ideas I have. It doesn't take much for him to be bumped up a … Read more
Well, I'm restoring an old robot, because I'm now able to use Basic Stamps. This robot is a Parallax & DeAgostini projects which came out from newsagent's, so … Read more
As a total moron, I've deleted the previous robot page while trying to clean some attachments
So, let's start again..
Steve the disembodied robotic arm as been a … Read more
Ahoy!
what I am trying to do is make a mobile platform with a little breadboard on it so that I can try different projects. Underneath I have a l298 motor driver … Read more
This is my first. It's nearly out of the book, but i tweaked the logic a bit for reacting to left, right or both sensors triggering
I made this years ago and i just … Read more
Find out my new project here.
Hope it respect all parameters in the challenge:
"The Chair Challenge!"Requirements:
Robot can be placed in any position and place … Read more
Harry is my current project, and he's a work-in-progress. My first goal was to simply build a nice differential-drive mobile base for my Basic Stamp so that it … Read more
Herpe is a curious-yet-skittish-puppy-bot. What he's supposed to do is seek you out and drive up to you, but if he gets too close, he backs away in fear. In … Read more
