Let's Make Robots!

Arduino Duemilanove

Naviagates around via ultrasound and takes control via bluetooth.
Using a
The "Artemis Nightshade" is my second LMR robot, named after a friend's favorite character.  The Artemis is a new robot as well as a continuation of my "Luna Rose" … Read more
Turtle controlled via USB by a host computer.
Using a
This robot has no "brain" even though it has a Arduino processor. The brain for the bot is located in the PC and the program is S4A (Scratch for Arduino, version … Read more
It acts as a theremin instrument and avoids obstacles also entertain :)
Using a
Hello to all, this is my first lmr added project, i've build robot in arduino ide, it's verry simple code, i've made this robot from scrap as you can see i found my … Read more
navigates via ultrasound, controlled by wii nun chuck
Using a
This is a robot that can be controlled by a wii nunchuck, or it can navigate on its own. It avoids cliffs with the ultrasonic sensor on the front arm, and it avoids … Read more
Navigate around avoiding obstacle via IR eye.
Using a
Hello every one Today I show you my work, from the early beginnings until now (It won't be long). (I'll try to be respectful of the english Grammar but i'am not … Read more
Hello LMR,   This is my first robot based on the arduino version of SHR (penny). It has as you can see IR sensor to avoid obstacles. The body is made from a … Read more
stEve started life as a robot shaped sweetie tin. I received him as part of a Christmas present last year (2011) from some friends. This Christmas Eve stEve was … Read more
creeps around looking for light, fire, other robots and long walks on the beach...
Using a
  A little robot that just wants to have fun!  The code is choppy but works. I used some of Bajdi's code changed it up a little and will post it(code) in a … Read more
Right now, basic obstacle avoidance and plays music.
Using a
 This robotic platform is still a work in progress.  I wanted to build a medium to large size robot for a long time!  after joining a robotics club and with the … Read more
  Basic obstacle avoidance robot using two servos for the wheels(lids from dog food), the caster is a funny plastic bolt cap they use in NYC on construction … Read more
This is REG•E and he is my first obstacle avoiding robot. He works off two Lego motors powered by 4 AA batteries and for a brain he has an Arduino Duemilanove. He … Read more
Walk forward and backword
Using a
Hi all, I’ve been working on my first real robot last week-end and wanted to share it. It’s a simple quadruped arduino robot controlled by serial (via USB). … Read more
Navigate around via ultrasound and infrared sensors
Using a
Hey guys! Here its me again with another "not so smart" project. As my second robot, I chose to build an obstacle avoider with an arduino duemilanove and the … Read more
  Hi Guys, This is my second robot. I use flex sensor + glove to control this robot hand .       Read more
Wanders around sensing obstacles with ultrasonic & IR sensors.
Using a
T.W.E.R.P. - The Wandering Electronic Robotics Platform was built to test sensors and code for future projects . The platform is the bottom of a RAD 1.0 robot (I … Read more
navigates in any direction , balanced walk, objects tracing, tracks and follows objects in its surroundings, various sitting and resting positions, shakehand, wall following
Using a
  INU 2.0 is a servo actuated quadraped dog robot ,that takes input from a  SHARP sensor and a TSOP sensor.It is controlled by  arduino duemilanove atmega328. My … Read more
Homemade delta robot. It uses an Arduino as a servo/relay controller. Data is transferred over serial port from a homebrewed Qt application to the Arduino. I use … Read more
Hi, This is my first robot.  It's a minisumo robot but as you can see it's more than 10cm long. But when the combat starts it fits into the 10x10 square by lifting … Read more
Can take simple Forward, backwards, stop commands.
Using a
My robot is a hacked RC car controled by an Arduino Duemilanove.   It has no sensors,  but I have left room on my chasis so I can add some more later when I feel … Read more
Bluetooth remote controlled robot capable of taking pictures
Using a
Ar-Du is finally finished.   The block diagram: Read more
My idea is to remake the 6 DOF BRAT biped Kit, which retails for $299, for less the half the price using popsicle sticks and glue for the frame, cheap Hitec HS-55 … Read more
This is my second version of my robotic arm. Last time I use basic stamp 2 to controlled the arm , now I use arduino to controlled it.       Arduino … Read more
Navigate around with IR sensor
Using a
R.A.V. ( Red Avoiding Vehicle) LOG: // 10/2/11 : LMR RAV and servocentercode files added Read more
A dog quadrapod robot with head and tail
Using a
It 's a bit of time I wanted to build a robot with legs. In particular I was fascinated by the possibility to create a fluid movement in the robot, close to nature. … Read more
Obsticle avoidance via a Ping UltraSonic sensor
Using a
This was my first build and I consider it an on going project. I built the frame work and drive line about a year ago. Due to lack of budget it sat until about … Read more
Navigates around via ultrasound
Using a
Please meet the Bliss Robot! v1: August 19, 2011 This is my Arduino-based SHR, and my very first robot. It is inspired by the start here robot and by Penny. I used … Read more
My first full project. This is a suprisingly capable little robot built on top of a R/C crawler chassis I found at a local thrift store. It can handle hills and … Read more
UPDATE : I've made some changes. It's smaller but for a dumb mistake now it's unstable, working on that! For the Motor Controller I'm using a L293D with a … Read more
The self-balancing robot building is today an activity that every robot builder can perform with Arduino. Searching in Google for self-balancing robot you can find … Read more