Let's Make Robots!

piezo speaker

Proofing code and build for future projects. Room for servos/sensors.
Using a
Mechanical: The original build took about 4 hours to get all the parts to fit together, but was unstable and off balance. After a few days of chewing on rebuilding … Read more
Spot X is my latest robot, but the first I've submitted here. The X stands for 10, because he's the 10th in a series of little robots I've built under the 'Spot' … Read more
OpenCV, HSV thresholding for object detection, bot moves towards target, adjusts position when it gets close enough
Using a
Overview: This is ASAR a robot built with an intention of using a raspberry pi as its brain.  Unfortunately the raspberry pi is not available until the end of May … Read more
Navigate via ultrasound and light, controlled by IR.
Using a
  Hi, This is my first project and I am a big dumb in electronics... :) so, if u see I'm doing or saying something wrong or stupid please tell me :) Mr. P stands … Read more
It wanders around, avoid obstables and dosent' fell from edges
Using a
Hi all, Here is my first robot using a micro-controller ! I started with the Start Here guide and it evolves a bit. I rewrote the code, it might not be as good as … Read more
Follows a line and avoid obstacles, Make sound with a piezo speaker
Using a
This is my entry for the DAGU "Beginners Robot Chassis Challenge". It is prelimary named Pacman, but the name maybe change in the future. Pacman was my first idea, … Read more
Built this little guy for a mate of mine. The main housing is from a speaker set designed to plug directly into a small MP3 player. The base is a machined aluminium … Read more
Act cute, try to keep itself charged
Using a
Not much to say about it at this point; this little guy is basically going to be a living ornament. Read more
This is "Stomper", a 3-servo walking robot I built a few years ago from plans in Karl Williams "Insectronics" book. I've resurrected him from my robot junk pile to … Read more