Here's my beetlebot which i call Buglet.
I got lots of pics but sorry, they aren't in right angle.
First i took parts from my box.
Then i went to cut a motor holder … Read more
SapoBot is a robot that wonders through spaces avoiding obstacles detects holes on the ground, follow walls and follow lines, to change between behaviors you only … Read more
THIS PROJECT IS CLOSED AND PARTS IN MY BOXES
Problem solved:
Okay so my problem was that motors didn't get enough power. I tested this with 6v and it … Read more
Introduction
SPURT stands for School Project Using Robot Technology, a concept introduced by the Rostock University, in Germany. You can find more about their … Read more
(Sorry for my english...) This is a simple maze solving robot that I made for an internal robotics competition on my university.
The maze was made with white … Read more
I have build this robot in 1994 but I think it is worth to mention it because it is not as dumb as his age may suggest.
The robot have two working modes: learning … Read more
Cyclops is a obstacle avoider robot with one obstacle detector. This obstacle detector is prepared with an IR led and IR receiving module. To detect the obstacle … Read more
Tesla will be a multifunctional robot that will have priority tasks. Unlike other robots that will just "do" things, this robot will have tasks only if certain … Read more
Start where?Almost a full year on LMR and still no "start here" robot. That would be getting really silly. Especially with all this Mr Basic stuff going on.
This … Read more
Well, I'm restoring an old robot, because I'm now able to use Basic Stamps. This robot is a Parallax & DeAgostini projects which came out from newsagent's, so … Read more
