Let's Make Robots!

Arduino Mega

Walk, Push ups, Navigate with ultrasound
Using a
Update: 03 May 2016  [Added video of push-ups and sonar test]   ---------------------------------------------------------------------- Hi everyone, I am … Read more
self balance
Using a
I controlled my balance robot using a a two fuzzy logic controller 1-one for (IMU feedback) using as input the angle and change in angle , the output is a PWM1 . … Read more
self balance
Using a
I control this robot by using two PID , one for gyro and other encoder measurement 1-one PID for tilt angle to let a robot it standing up 2-second PID for … Read more
hexapod capable of climbing steps. Can operate as quad using front legs as claspers
Using a
OK - this is going to be a detailed development blow by blow account of my latest build. the name comes from one of my favorite fossils of the Cambrian (see video), … Read more
ROB3, my third robot started out using my ROB1 base, as I wanted to play around with the gyro again using a 2 wheeled robot, but alas, one of the servos died. So … Read more
What is a space rover A space Rover is a robot which is capable of moving over a rough and difficult terrain and greater information based on what task the robot … Read more
Flame detection, Obstacle avoidance
Using a
FLoeBot was born out of a quest to build something different from what everyone else at my college had been doing for years. I also wanted to build something that … Read more
Autonomous waypoint navigation
Using a
1/19/14 - Outdoor testing to follow a hexagonal path. Direction is determined by HMC5883L. 1/18/14 - Arduino Uno is replaced with a Mega.   1/6/14 - Digital … Read more
It will holds altitude and hover at a stable state
Using a
The project consists of a flying object which holds altitude and hover at a stable state. The flying object is to use the VTOL (Vertical Take-Off and Landing) … Read more
I have been working on this biped for a few weeks now. This is my first robot. After initial tests, I am changing the fixed head with a movable one. can be seen … Read more
This is the third prototype of Cosma. It is WIP. Nevertheless I thought I share my progress with you... 1. Shield design Read more
Reports from near space
Using a
July 21, 2013 This is a ultra light weighted version of the Cosma robot, especially trimmed for the weather balloon launch. It just weighs 140 g without the battery … Read more
Hi, this is my test platform for my grade project on the University, since the University have a Lynxmotion rover with the AL5D robotic arm and I've already managed … Read more
Interacts with its environment and human beings and learn from them
Using a
This is M.I.A., a simple humanoid robot platform. M.I.A. Basic Specifications  Microcontroller: Arduino Mega Shield: Read more
autonomous lawn mower
Using a
Well I have finally made some time this winter to return to my lawn mower project.. This has plagued me for a few years, trying to figure out the buried wire … Read more
Interacts with its environment and human beings and learns from them
Using a
I am working since beginning of this year on a new humanoid robot to continue my AI experiments.The ability of machine learning will be given by algorithms … Read more
Interacts with human beings
Using a
***Update 17/05/2012*** Fubo assembled and partly wired … Read more
MmBot (so named as she was born at Media Molecule) is designed to be a cute robot pet. The key objective is to wander around the office, interacting with people and … Read more
Avoids obstacles, builds thermal images
Using a
This was a first robot - really just about getting to try out the technology, learn techniques and get up to speed with how to do this stuff. It avoids obstacles … Read more
This is my first robot project. I've had an interest in electronics for as long as I can remember and began playing with PICAXE about 5 years ago, but never really … Read more
Hello I am working on a new project which I call computer parts CNC. The basic design calls for three stepper motor driven carriage assemblies from old disk drives … Read more
Navigate around and separated 3 kind of recycled material.
Using a
his project is a graduation conclusion project, consist robot that navegate around and identify objects ( the objects can be bottle glass, aluminum and plastic ) … Read more
Remote control or obstacle avoidance
Using a
The other day I was staring at my trash bin and there's an idea comes up in my mind. Since my wife is not home for while I think I should be able to do something … Read more
It goes around just like an RC car but it's much more fun because it's floating.
Using a
Here's another project that I have, it was a physics project for school but I thought I could put an Arduino somewhere in there and make it more interesting, and it … Read more
The rover drives around avoiding obstacles using the PING))) ultrasound rangefinder.
Using a
So this is my first robot report. It's on the first robot I built too. To say it from the beginning, I'm sorry I didn't put the LMR loge on my videos but I made … Read more
Navigate about using ultrasound sensors.
Using a
This is my robot based on the Arduino Mega board.   Read more
Interactive Instalation
Using a
Inner’s Lair started with a crazy idea of having an immersive interactive installation that could gather many artistic and computational topics that we at … Read more